Characterization of Duplex Stainless Steel Weld Metals Obtained by Hybrid Plasma-Gas Metal Arc Welding

Download

index.pdf

Date

2013-07-01

Author

Yurtışık, Koray
Tirkeş, Süha
Gür, Cemil Hakan
Gürbüz, Rıza

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

356
views

106
downloads

Despite its high efficiency, autogenous keyhole welding is not well-accepted for duplex stainless steels because it causes excessive ferrite in as-welded duplex microstructure, which leads to a degradation in toughness and corrosion properties of the material. Combining the deep penetration characteristics of plasma arc welding in keyhole mode and metal deposition capability of gas metal arc welding, hybrid plasma - gas metal arc welding process has considered for providing a proper duplex microstructure without compromising the welding efficiency. 11.1 mm-thick standard duplex stainless steel plates were joined in a single-pass using this novel technique. Same plates were also subjected to conventional gas metal arc and plasma arc welding processes, providing benchmarks for the investigation of the weldability of the material. In the first place, the hybrid welding process enabled us to achieve less heat input compared to gas metal arc welding. Consequently, the precipitation of secondary phases, which are known to be detrimental to the toughness and corrosion resistance of duplex stainless steels, was significantly suppressed in both fusion and heat affected zones. Secondly, contrary to other keyhole techniques, proper cooling time and weld metal chemistry were achieved during the process, facilitating sufficient reconstructive transformation of austenite in the ferrite phase.

Subject Keywords

Mechanical Engineering, Mechanics of Materials, Metals and Alloys

URI

https://hdl.handle.net/11511/38398

Journal

SOLDAGEM & INSPECAO

DOI

https://doi.org/10.1590/s0104-92242013000300003

Collections

Welding Technology and Nondestructive Testing Research and Application Center (KTTMM), Article

Suggestions

OpenMETU
Core

Refinement of primary carbides in AISI DC 53 cold work tool steel by thin section copper permanent mould casting and water atomization ÇARDAKLI, İSMAİL SEÇKİN; Kalkanlı, Ali (Informa UK Limited, 2019-05-01) In this study, as alternative methods to conventional production methods involving thin section copper permanent mould casting (fast solidification) and water atomization (rapid solidification) of AISI DC 53 cold work tool steel have been investigated. Thin slabs obtained by copper mould casting was homogenized at 1150 degrees C for one hour and then hot rolling was be applied. After hot rolling, conventional heat treatment have been applied to thin slabs. The same heat treatment procedure have been perform...
Kinetics and microstructural analysis of fatigue fracture progress in weld joints of duplex stainless steel grade 2205 Yurtışık, Koray; Gürbüz, Rıza; Department of Metallurgical and Materials Engineering (2013) Despite its high efficiency, autogenous keyhole welding technique leads to an excessive δ-ferrite formation in as-welded duplex stainless steels that leads to deterioration of the corrosion properties of the material, as well as its toughness. Developing the hybrid plasma-gas metal arc welding procedure for duplex stainless steels, a narrow gap and single-pass weldment on 11 mm-thick duplex stainless steel (grade 2205) plates has been achieved. Contrary to other keyhole techniques, such as Laser beam weldin...
Production of in situ aluminum-titanium diboride master alloy formed by slag-metal reaction CHANGIZI, Ahmad; Kalkanlı, Ali; SEVINC, NACİ (Elsevier BV, 2011-01-12) Al-TiB(2) master alloys have received much attention in recent years owing to their potential as efficient grain refiners for aluminum foundry alloys. In this study, the process of production of master alloys was investigated to develop a low cost method, namely, slag-metal reaction. This method can be used to fabricate Al-TiB2 master alloy in situ from the TiO(2)-H(3)BO(3)-Na(3)AlF(6) and Al system. Since the price of the raw materials is low and the technology is simple, the processing technique appears t...
Effects of fabrication method on initial powder characteristics and liquid phase sintering behaviour of tungsten Erol, Mahmut; Erdogan, Metehan; Karakaya, İshak (Elsevier BV, 2018-12-01) Direct electrochemical production of tungsten involves removal of oxygen in solid state from an important tungsten compound, calcium tungstate, in molten salts. A detailed experimental study was performed to characterize the liquid phase sintering behaviour of the tungsten powder (WE), which was produced by the direct electrochemical reduction technique. All of the tungsten heavy alloy (WHA) compositions covered in this study, contained four parts nickel, one part cobalt and over 90 wt% tungsten. The pellet...
Characterization of ultra-fine grained steel samples produced by high pressure torsion via magnetic barkhausen noise analysis Bayramoğlu, Sadık; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2009) High Pressure Torsion (HPT) is one of the most widely used severe plastic deformation methods which enable to obtain a crack free ultra-fine grained bulk material with improved mechanical properties like increased strength and toughness. In the process, a disc shaped sample is pressed between two anvils and deformed via surface friction forces by rotating one of the anvils. The aim of this study is to nondestructively characterize the variations in the deformation uniformity of the severely deformed steel d...

Citation Formats

K. Yurtışık, S. Tirkeş, C. H. Gür, and R. Gürbüz, “Characterization of Duplex Stainless Steel Weld Metals Obtained by Hybrid Plasma-Gas Metal Arc Welding,” SOLDAGEM & INSPECAO, pp. 207–216, 2013, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/38398.