Enhancement in Oxygen Reduction Reaction Activity of Nitrogen-Doped Carbon Nanostructures in Acidic Media through Chloride-Ion Exposure

Download
index.pdf
2018-07-11
Jain, Deeksha
Mamtani, Kuldeep
Gustin, Vance
Gunduz, Seval
Çelik, Gökhan
Waluyo, Iradwikanari
Hunt, Adrian
Co, Anne C.
Ozkan, Umit S.
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
194
views
115
downloads
Nitrogen-doped carbon nanostructures (CNx) are promising cathode materials as catalysts for the oxygen reduction reaction (ORR) in polymer electrolyte membrane (PEM) fuel cells. Incorporation of chlorine into CNx catalysts using a facile methodology can lead to a significant improvement in the ORR activity in acidic media, as confirmed by electrochemical half-cell measurements. The chlorine-containing CNx catalyst (CNx-Cl) is synthesized by soaking CNx powder in 0.3 M HCl. The analysis of near-edge X-ray absorption fine structure spectra collected in the C K-edge region and Fourier-transform infrared spectra confirm the formation of C-Cl bonds in CNx-Cl. X-ray photoelectron spectroscopy (XPS) results reveal the presence of three distinct chlorine species in the CNx-Cl sample: (i) organic chlorine (C-Cl), (ii) anionic chloride in the positively charged environment of a pyridinium ring (N+Cl-), and (iii) physisorbed ionic chloride. Results from temperature-programmed desorption studies under inert atmosphere corroborate the conclusions from XPS depth profiling analysis. The improvement in ORR activity after exposure of the CNx catalyst to chloride anions can be attributed to the creation of C-Cl functionalities as additional active sites. The difference in the electronegativity of C and Cl atoms results in a net positive charge on adjacent carbon sites, leading to the side-on adsorption of oxygen molecules and breakage of the O-O bond during ORR.
PEM fuel cells, ORR, CNx, Chlorination, N-doped carbon
https://hdl.handle.net/11511/42766
ChemElectroChem
Department of Chemical Engineering, Article

Suggestions

Improvement of PEMFC performance with Nafion/inorganic nanocomposite membrane electrode assembly prepared by ultrasonic coating technique
Devrim, Yilser; Erkan, Serdar; BAÇ, NURCAN; Eroğlu, İnci (2012-11-01)
electrode assemblies with Nafion/nanosize titanium silicon dioxide (TiSiO4) composite membranes were manufactured with a novel ultrasonic-spray technique and tested in proton exchange membrane fuel cell (PEMFC). Nafion/TiO2 and Nafion/SiO2 nanocomposite membranes were also fabricated by the same technique and their characteristics and performances in PEMFC were compared with Nafion/TiSiO4 mixed oxide membrane. The composite membranes have been characterized by thermogravimetric analysis, scanning electron m...
Enhancement of the Start-Up Time for Microliter-Scale Microbial Fuel Cells (mu MFCs) via the Surface Modification of Gold Electrodes
Sen-Dogan, Begum; Okan, Meltem; Afsar-Erkal, Nilufer; Ozgur, Ebru; Zorlu, Ozge; Külah, Haluk (MDPI AG, 2020-07-01)
Microbial Fuel Cells (MFCs) are biological fuel cells based on the oxidation of fuels by electrogenic bacteria to generate an electric current in electrochemical cells. There are several methods that can be employed to improve their performance. In this study, the effects of gold surface modification with different thiol molecules were investigated for their implementation as anode electrodes in micro-scale MFCs (mu MFCs). Several double-chamber mu MFCs with 10.4 mu L anode and cathode chambers were fabrica...
Influence of FEP nanoparticles in catalyst layer on water management and performance of PEM fuel cell with high Pt loading
Avcioglu, Gokce S.; FIÇICILAR, BERKER; Eroğlu, İnci (2017-01-05)
In this study, fluorinated ethylene propylene (FEP) nanoparticles were added to catalyst layer (CL) to facilitate excess water removal from the triple phase boundary in high Pt loading (1.2 mg/cm(2)) proton exchange membrane fuel cell (PEMFC) electrodes. The loading of PEP in the catalyst ink was varied from zero to 30 weight percentage. High-performance electrodes for anode and cathode were prepared by ultrasonic spray coating technique with a commercial catalyst containing 70 wt. % Pt on carbon. Different...
Polybenzimidazole/SiO2 hybrid membranes for high temperature proton exchange membrane fuel cells
DEVRİM, YILSER; Devrim, Huseyin; Eroğlu, İnci (2016-06-22)
Polybenzimidazole/Silicon dioxide (PBI/SiO2) hybrid membranes were prepared and characterized as alternative materials for high temperature proton exchange membrane fuel cell (HT-PEMFC). The PBI/SiO2 membranes were cast from a PBI polymer synthesized in the laboratory and contained 5 wt. % SiO2 as inorganic filler. Scanning electron microscopy (SEM) analysis showed that the uniform and homogeneous distribution of SiO2 particles in the hybrid membrane. The existence SiO2 has improved the acid retention and p...
Facilitation of water management in low Pt loaded PEM fuel cell by creating hydrophobic microporous layer with PTFE, FEP and PDMS polymers: Effect of polymer and carbon amounts
ÖZTÜRK, Ayşenur; FIÇICILAR, BERKER; Eroğlu, İnci; BAYRAKÇEKEN YURTCAN, Ayşe (2017-08-17)
Microporous layers (MPLs) were prepared with different hydrophobic polymers to establish water management in polymer electrolyte membrane (PEM) fuel cells. Besides conventionally used polymers polytetrafluoroethylene (PTFE) and fluorinated ethylene propylene (FEP), two different molecular weights (MW) of polydimethylsiloxane (PDMS) polymer were used as hydrophobic materials in MPL. Membrane electrode assemblies (MEAs) having MPLs with low MW PDMS polymer exhibited the best fuel cell performance compared to ...
Citation Formats
D. Jain et al., “Enhancement in Oxygen Reduction Reaction Activity of Nitrogen-Doped Carbon Nanostructures in Acidic Media through Chloride-Ion Exposure,” ChemElectroChem, pp. 1966–1975, 2018, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/42766.
METU IIS - Integrated Information Service open@metu.edu.tr