Uncertainty Analysis of Heat Transfer Predictions Using Statistically Modeled Data From a Cooled 1-1/2 Stage High-Pressure Transonic Turbine

Date

2014-06-01

Author

Kahveci, Harika Senem

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

223
views

0
downloads

This paper compares predictions from a 3D Reynolds-averaged Navier-Stokes code and a statistical representation of measurements from a cooled 1-1/2 stage high-pressure transonic turbine to quantify predictive process sensitivity. A multivariable regression technique was applied to both the inlet temperature measurements obtained at the inlet rake, the wall temperature, and heat transfer measurements obtained via heat-flux gauges on the blade airfoil surfaces. By using the statistically modeled temperature profiles to generate the inlet boundary conditions for the computational fluid dynamics analysis, the sensitivity of blade heat transfer predictions due to the variation in the inlet temperature profile and uncertainty in wall temperature measurements and surface roughness is calculated. All predictions are performed with and without cooling. Heat transfer predictions match reasonably well with the statistical representation of the data, both with and without cooling. Predictive precision for this study is driven primarily by inlet profile uncertainty followed by surface roughness and gauge position uncertainty.

Subject Keywords

Mechanical Engineering

URI

https://hdl.handle.net/11511/47894

Journal

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME

DOI

https://doi.org/10.1115/1.4025764

Collections

Department of Aerospace Engineering, Article

Suggestions

OpenMETU
Core

Uncertainty analysis of coordinate measuring machine (CMM) measurements Sözak, Ahmet; Konukseven, Erhan İlhan; Department of Mechanical Engineering (2007) In this thesis, the measurement uncertainty of Coordinate Measuring Machine (CMM) is analysed and software is designed to simulate this. Analysis begins with the inspection of the measurement process and structure of the CMMs. After that, error sources are defined with respect to their effects on the measurement and then an error model is constructed to compensate these effects. In other words, systematic part of geometric, kinematic and thermal errors are compensated with error modelling. Kinematic and geo...
Experimental investigation of a spherical solar collector Bakır, Öztekin; Yamalı, Cemil; Department of Mechanical Engineering (2006) The purpose of this study is to investigate the performance of a spherical solar collector by using numerical and experimental methods. For this analysis, equations were obtained by choosing appropriate control volumes in the system and applying The First Law of Thermodynamics. The experiments were realized at four different mass flow rates and non-flow situation. For the numerical simulation of the system, a computer program in Mathcad was written. Another computer program in Mathcad was written for the va...
Vibration-based damage identification in beam-like composite laminates by using artificial neural networks Şahin, Melin (SAGE Publications, 2003-01-01) This paper investigates the effectiveness of the combination of global (changes in natural frequencies) and local (curvature mode shapes) vibration-based analysis data as input for artificial neural networks (ANNs) for location and severity prediction of damage in fibre-reinforced plastic laminates. A finite element analysis tool has been used to obtain the dynamic characteristics of intact and damaged cantilever composite beams for the first three natural modes. Different damage scenarios have been introdu...
Numerical simulation and analytical optimization of microchannel heat sinks Türkakar, Göker; Okutucu Özyurt, Hanife Tuba; Department of Mechanical Engineering (2010) This study has two main objectives: The performance evaluation of existing microchannel heat sinks using a CFD model, and the dimensional optimization of various heat sinks by minimizing the total thermal resistance. For the analyses, the geometric modeling is performed using the software GAMBIT while the thermal analysis is performed with FLUENT. The developed model compares very well with those available in the literature. Eight different metal-polymer microchannel heat sinks are analyzed using the model ...
Experimental investigation and numerical analysis of microchannel heatsinks for phased array radar cooling application Alpsan, Emrah; Sert, Cüneyt; Department of Mechanical Engineering (2008) Experimental measurements and numerical simulations have been performed on copper and aluminum microchannel heatsinks of 300, 420, 500, and 900 μm channel widths. The heatsinks have been designed specifically for use with T/R (transmit/receive) module cooling applications of military phased array radars. An analytical calculation was also performed to aid in the design methodology. Distilled water was used as the coolant with flow rates ranging from 0.50 lpm (liters per minute) to 1.00 lpm. Local heat fluxe...

Citation Formats

H. S. Kahveci, “Uncertainty Analysis of Heat Transfer Predictions Using Statistically Modeled Data From a Cooled 1-1/2 Stage High-Pressure Transonic Turbine,” JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, pp. 0–0, 2014, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/47894.