Experimental modal analysis of nonlinear systems by using response-controlled stepped-sine testing

Download

10.1016:j.ymssp.2020.107023.pdf

Date

2021-1

Author

Karaağaçlı, Taylan
Özgüven, Hasan Nevzat

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

692
views

1358
downloads

Although the identification and analysis of structures with a localized nonlinearity, either weak or strong, is within reach, identification of multiple nonlinearities coexisting at dif- ferent locations is still a challenge, especially if these nonlinearities are strong. In such cases, identifying each nonlinearity separately requires a tedious work or may not be pos- sible at all in some cases. In this paper, an approach for experimental modal analysis of nonlinear systems by using Response-Controlled stepped-sine Testing (RCT) is proposed. The proposed approach is applicable to systems with several nonlinearities at various dif- ferent locations, provided that modes are well separated and no internal resonances occur. Step-sine testing carried out by keeping the displacement amplitude of the driving point constant yields quasi-linear frequency response functions directly, from which the modal parameters can be identified as functions of modal amplitude of the mode of concern, by employing standard linear modal analysis tools. These identified modal parameters can then be used in calculating near-resonant frequency response curves, including the unsta- ble branch if there is any, for various untested harmonic forcing cases. The proposed RCT approach makes it also possible to extract nonlinear normal modes experimentally without using sophisticated control algorithms, directly from the identified modal constants, and also to obtain near-resonant frequency response curves experimentally for untested constant-amplitude harmonic forcing cases by extracting isocurves of constant- amplitude forcing from the measured Harmonic Force Surface (HFS), a new concept pro- posed in this paper. The key feature of the HFS is its ability to extract unstable branches together with turning points of constant-force frequency response curves directly from experiment, accurately. The method is validated with numerical and experimental case studies. The numerical example consists of a 5 DOF lumped system with strong several conservative nonlinear elements. Experimental case studies consist of a cantilever beam supported at its free-end by two metal strips which create strong stiffening nonlinearity, and a real missile structure which exhibit moderate damping nonlinearity mostly due to several bolted joints on the structure.

Subject Keywords

Control and Systems Engineering, Signal Processing, Mechanical Engineering, Civil and Structural Engineering, Aerospace Engineering, Computer Science Applications, Nonlinear experimental modal analysis, Nonlinear system identification, Response controlled stepped sine test, Nonlinear mode, Harmonic force surface, Unstable branch

URI

https://hdl.handle.net/11511/50718

Journal

Mechanical Systems and Signal Processing

DOI

https://doi.org/10.1016/j.ymssp.2020.107023

Collections

Computer Aided Design, Manufacturing and Robotics Research and Application Center (BİLTİR), Article

Suggestions

OpenMETU
Core

Experimental validation of pseudo receptance difference (PRD) method for nonlinear model updating Canbaloglu, Guvenc; Özgüven, Hasan Nevzat (Springer, 2015-02-05) In real life applications most of the structures have nonlinearities, which restrict us applying model updating techniques available for linear structures. Well-established FRF based model updating methods would easily be extended to a nonlinear system if the FRFs of the underlying linear system (linear FRFs) could be experimentally measured. When frictional type of nonlinearity co-exists with other types of nonlinearities, it is not possible to obtain linear FRFs experimentally by using low level forcing. ...
Nonlinear structural modification and nonlinear coupling Kalaycioglu, Taner; Özgüven, Hasan Nevzat (Elsevier BV, 2014-06-03) Structural modification methods were proved to be very useful for large structures, especially when modification is local. Although there may be inherent nonlinearities in a structural system in various forms such as clearances, friction and cubic stiffness, most of the structural modification methods are for linear systems. The method proposed in this work is a structural modification/coupling method developed previously, and extended to systems with nonlinear modification and coupling. The method is most ...
Nonlinear system identification and nonlinear experimental modal analysis by using response controlled stepped sine testing Karaağaçlı, Taylan; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (2020-12-24) In this work, two novel nonlinear system identification methods are proposed in both the modal and spatial domains, respectively, based on response-controlled stepped-sine testing (RCT) where the displacement amplitude of the excitation point is kept constant throughout the frequency sweep. The proposed nonlinear modal identification method, which is also a nonlinear experimental modal analysis technique, applies to systems with several nonlinearities at different (and even unknown) locations (e.g. joint no...
Model updating of nonlinear structures from measured FRFs Canbaloglu, Guvenc; Özgüven, Hasan Nevzat (Elsevier BV, 2016-12-01) There are always certain discrepancies between modal and response data of a structure obtained from its mathematical model and experimentally measured ones. Therefore it is a general practice to update the theoretical model by using experimental measurements in order to have a more accurate model. Most of the model updating methods used in structural dynamics are for linear systems. However, in real life applications most of the structures have nonlinearities, which restrict us applying model updating techn...
A method of strain and stress analysis for failure prediction in laminated composites Ardiç, E.S.; Bolcan, C.; Kayran, Altan (SAGE Publications, 1995-01-01) In this study, a method of strain and stress analysis is developed to predict the failure initiation in laminated composites containing two or more different kinds of laminae. In principle, the method developed in this study is similar to non-local elasticity, but the long-range interactions are considered on the strains instead of material moduli, and the method is developed and applied as a realistic and practical one. Firstly, the strain fields in each layer are determined separately and then these strai...

Citation Formats

T. Karaağaçlı and H. N. Özgüven, “Experimental modal analysis of nonlinear systems by using response-controlled stepped-sine testing,” Mechanical Systems and Signal Processing, 2021, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/50718.