MEMS jiroskopun g-duyarlılığının bastırılmasına yönelik yöntem

Date

2020-11-23

Author

Gavcar, Hasan Doğan
Azgın, Kıvanç
Akın, Tayfun

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

594
views

0
downloads

Buluş, kapalı döngü geri besleme devresi (2) yardımı ile jiroskopun hareketli algılama yapısını harici ivmelerden bağımsız olarak sabit tutarak MEMS jiroskopunun (1) g-duyarlılığının bastırılması için bir yöntem sağlamakla ilgilidir.

URI

https://hdl.handle.net/11511/70065

Collections

Micro-Electro-Mechanical Systems Research and Application Center (MEMS), Patent / Utility Model

Suggestions

OpenMETU
Core

MEMS kapasitif ultrasonik çevirgeçlerin sonlu elemanlar yöntemi yardımıyla tasarımı ve simulasyonunun yapılması Bayram, Barış(2016-12-31) Genel olarak MEMS cihazlarının özel olarak ise kapasitif ultrasonik çevirgeçlerin tasarım ve üretim aşamaları arasında yer alan sonlu elemanlar yöntemiyle simulasyon işlemi, en verimli tasarıma en ekonomik yoldan ulaşmak açısından büyük önem teşkil etmektedir. Projede MEMS kapasitif ultrasonik çevirgeçlerin tasarımının ve simulasyonunun bilgisayar ortamında yapılıp, üretime ve deneme yanılma metoduna gerek kalmadan kullanılacağı alana göre optimum tasarımın oluşturulacağı bir metod önerilmektedir. Bu metodd...
A WAFER LEVEL VACUUM PACKAGING TECHNOLOGY FOR MEMS BASED LONG-WAVE INFRARED SENSORS Demirhan Aydın, Gülşah; Akın, Tayfun; Kalay, Yunus Eren; Department of Micro and Nanotechnology (2022-8-11) This thesis proposes a new approach to obtain a wafer level vacuum packaging that satisfies the requirements of the thermal sensors at low cost and with high performance. The moth-eye structures are formed on both side of a polished flat silicon wafer without any cavity to allow the transmission of the infrared radiation in long wave infrared region (LWIR). Then, this wafer is bonded to another spacer wafer using Au-In Trans-liquid phase (TLP) approach that allows bonding at low temperature (around 200℃); t...
A MULTISCALE MODELING APPROACH TO UNDERSTAND MECHANISM OF DEPOSIT CONTROL BY LUBRICANT DETERGENTS AND DISPERSANTS Kan, Esra; Yıldırım, Erol; Department of Polymer Science and Technology (2022-7-29) With the recent developments in high performance computing power, molecular modeling calculations to design and improve new generation additives for engine oils have reached a level that can support and guide experimental results. Control of insoluble nanoparticle aggregations in oil and on the engine pistons is the most important key performance parameter for lubricant oil additives. General consensus about the mechanism of deposit build-up is the self-aggregation of nanosized insoluble structures. Deterge...
High-performance readout circuit for resonator-based MEMS accelerometer using digital control loop Ali, Muhammad; Akın, Tayfun; Department of Electrical and Electronics Engineering (2022-11) This study proposes a new digital control loop-based compact readout circuit for a resonant MEMS accelerometer providing high performance with reduced temperature and power supply dependence while utilizing low processing power. The readout circuit utilizes a charge-sensing pre-amplifier stage that converts the small motional current to readable voltage, which is then converted to the digital domain using a 16-bit ADC to perform the amplitude and frequency extraction in the digital domain. A Proportional In...
Thermal imaging based on mechanical vibrations Yılmaz, Şener; Azgın, Kıvanç; Department of Mechanical Engineering (2022-8-19) The thesis proposes a digital, resonance readout method based on a lock-in based digital phase locked loop (DPLL) mechanism, which is designed, simulated, implemented and tested using a Xilinx made Field Programmable Gate Array (FPGA). Implementation is performed using a hardware descriptive language (VHDL) on low level. Certain digital signal processing algorithms such as lock-in detection, DPLL, DDS and CORDIC are implemented, simulated and tested. Moreover, the design is shown to be capable of resonating...

Citation Formats

H. D. Gavcar, K. Azgın, and T. Akın, “MEMS jiroskopun g-duyarlılığının bastırılmasına yönelik yöntem,” 00, 2020.