Optical design of TCO-free interconnecting layer for all-perovskite tandem solar cells

Date

2021-07-12

Author

Koc, Mehmet
Ameri, Mohsen
Yerci, Selçuk

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

318
views

0
downloads

Organic-inorganic hybrid perovskite materials are excellent candidates as light absorbers in tandem solar cells with advantages of tunable bandgaps, high absorption coefficients, and facile and low-cost fabrication processes. As the key component of a tandem structure, the interconnecting layer (ICL) requires optical transparency, efficient carrier recombination, and facile up-scalability. To demonstrate the feasibility of an efficient TCO-free ICL in all-perovskite tandem solar cell devices, we have performed a comprehensive computational analysis using the transfer matrix method. The results suggest that varying the silver recombination layers up to 3 nm does not present a significant effect on the maximum achievable photocurrent (MAPC) of the cell. Moreover, the highest MAPC from the tandem cell with the lowest sensitivity to electron and hole transport layer thicknesses can be obtained by the transport layers with refractive indices within the range of 1.9-2.6. The findings are of direct practical relevance, i.e., with meeting our optical framework, a fabrication procedure can be merely directed toward the electrical optimization of the ICL. The presented methodology can serve as an introduction to benchmark ICL design for multi-junction excitonic solar cells.

URI

https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85110488134&origin=inward
https://hdl.handle.net/11511/91448

Journal

Applied Physics Letters

DOI

https://doi.org/10.1063/5.0048780

Collections

Center for Solar Energy Research and Applications (GÜNAM), Article

Suggestions

OpenMETU
Core

Optical light management by self-arrangement of inverted tetragonal pyramids on the silicon surface through copper-assisted etching technique in a single step Donercark, Ergi; Çolakoğlu, Tahir; Terlemezoğlu, Makbule; Abak, Musa Kurtulus; Çiftpınar, Emine Hande; Bek, Alpan; Turan, Razit (2022-09-01) Developing efficient light trapping techniques plays a crucial role in improving silicon (Si) solar cell parameters by decreasing optical losses. Herein, four various surface morphologies by copper-assisted chemical etching (Cu-ACE) technique under various process conditions were developed. The etching solution is composed of copper nitrate trihydrate (Cu[NO3](2)), hydrofluoric acid, and hydrogen peroxide in deionized water. The systematic correlation study on the molarity of the chemical ingredients reveal...
Planar perovskite solar cells with metal oxide transport layers by co-evaporation and hybrid vapor-solution sequential method Soltanpoor, Wiri; Yerci, Selçuk; Department of Micro and Nanotechnology (2020) The recent success in achieving beyond 25% efficiency with perovskite solar cells (PSC) has called for further upgrading the fabrication techniques to meet the scalability requirements of the photovoltaic (PV) industry. Co-evaporation and a hybrid vapor-solution technique have been shown to produce uniform and efficient planar PSCs. Therefore, in this study, co-evaporation method was optimized studying the partial pressure of the organic precursor. Later electron transport layers in n-i-p and p-i-n structur...
Performance evaluation and comparison of low voltage grid-tied three-phase AC/DC converter configurations with SI and SIC semiconductor switches Öztoprak, Oğuzhan; Hava, Ahmet Masum; Department of Electrical and Electronics Engineering (2019) In this thesis, as compared to silicon IGBT (Si-IGBT) technology, the advantages of using higher efficiency and faster wide bandgap silicon carbide (SiC) semiconductor switches in low voltage three-phase grid-tied PWM DC/AC voltage source converters (VSCs) are investigated in terms of sizing, efficiency and economic considerations for MW-scale photovoltaic power plant applications. As the cost and energy efficiency of a VSC strongly affect the total system economics, this thesis proposes a design methodolog...
Photovoltaic performance of CdS/CdTe junctions on ZnO nanorod arrays Kartopu, G.; Turkay, D.; Özcan, Can; Hadıbrata, W.; Aurang, P.; Yerci, Selçuk; Ünalan, Hüsnü Emrah; Barrioz, V.; Qu, Y.; Bowen, L.; Gurlek, A. K.; Maiello, P.; Turan, Raşit; Irvine, S. J. C. (2018-03-01) One-dimensional nanostructures, such as nanorod (NR) arrays, are expected to improve the photovoltaic (PV) response of solar cells with an ultrathin absorber due to an increased areal (junction) density and light trapping. We report on the deposition of CdS and CdTe:As semiconductor thin films on ZnO NR arrays by means of metalorganic chemical vapour deposition (MOCVD). The change in optical properties of the ZnO NRs upon the growth of CdS shell was monitored and compared to the simulated data, which confir...
Hybrid Vapor-Solution Sequentially Deposited Mixed-Halide Perovskite Solar Cells Soltanpoor, Wiria; Dreessen, Chris; Şahiner, Mehmet Cem; Susic, Isidora; Afshord, Amir Zarean; Chirvony, Vladimir S.; Boix, Pablo P.; Günbaş, Emrullah Görkem; Yerci, Selçuk; Bolink, Henlk J. (2020-08-01) The recent sky-rocketing performance of perovskite solar cells has triggered a strong interest in further upgrading the fabrication techniques to meet the scalability requirements of the photovoltaic industry. The integration of vapor deposition into the solution process in a sequential fashion can boost the uniformity and reproducibility of the perovskite solar cells. In addition, mixed-halide perovskites have exhibited outstanding crystallinity and higher stability compared with iodide-only perovskite. An...

Citation Formats

M. Koc, M. Ameri, and S. Yerci, “Optical design of TCO-free interconnecting layer for all-perovskite tandem solar cells,” Applied Physics Letters, pp. 0–0, 2021, Accessed: 00, 2021. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85110488134&origin=inward.