THE EFFECT OF PRIMARY AIR SECONDARY AIR DISTRIBUSTION ON THE COMBUSTION CHARACTERISTICS OF A LOW NOX PULVERIZED COAL BURNER USING CFD ANALYSIS

Date

2015-06-11

Author

Kapusuz, Erinç
Yükselentürk, Yalçın
Yılmaz, Barış
Yılmaz, Ali
Yozgatlıgil, Ahmet
Gökalp, İskender

Metadata

Show full item record

Item Usage Stats

133
views

0
downloads

URI

https://hdl.handle.net/11511/75932

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

The effect of shape memory alloys on the ductility of exterior reinforced concrete beam-column joints using the damage plasticity model Halahla, Abdulsamee M.; Abu Tahnat, Yazan B.; Almasri, Amin H.; Voyiadjis, George Z. (Elsevier BV, 2019-12-01) Using shape memory alloys (SMA) bars can significantly enhance the ductility of exterior reinforced concrete joints, where they can replace the conventional steel reinforcement. This research focuses on studying the effect of using SMA on the ductility capacity of exterior reinforced concrete beam-column joints at different column axial load levels. Finite element analysis was carried out and compared with the experimental results from the literature for verification purposes, and both were compared with th...
The effect of hip rotation on bone mineral density of the proximal femur measured by dual energy X-ray absorptiometry Celik, Oezguer; Salci, Yasar; MANİSALI, METİN; Korkusuz, Feza (2009-01-01) Objectives: The aim of this study was to compare the effect of lower extremity position changes on hip bone mineral density measured by dual energy X-ray absorptiometry.
The effect of Turkish mortality improvements on the cost of annuities using entropy measure Yıldırım, Bükre; Büyükyazıcı, Murat (null; 2015-05-12)
The effects of HRT pH and SRT on dark fermentative hydrogen production in an SBR using sucrose Tunçay, Güneş; Bayramoğlu, Tuba Hande; Eroğlu, İnci; Gündüz, Ufuk (2015-11-18)
THE EFFECT OF REUSED POWDER CHARACTERISTICS ON THE PROPERTIES OF ADDITIVELY MANUFACTURED 17-4 PH STAINLESS STEEL Kahraman, Ece; Ögel, Bilgehan; Yasa, Evren; Department of Metallurgical and Materials Engineering (2022-4-25) Powder bed additive manufacturing methods use the powder form of the material of the part to be produced as raw material. The quality of the production is highly dependent on the properties of the powder used in the first place. Consistently using new unused powder for each new additive manufacturing is costly and removes the advantage of additive manufacturing, i.e. low amount of waste material. In powder bed additive manufacturing methods, powders are laid layer by layer and melted by laser or electron be...

Citation Formats

E. Kapusuz, Y. Yükselentürk, B. Yılmaz, A. Yılmaz, A. Yozgatlıgil, and İ. Gökalp, “THE EFFECT OF PRIMARY AIR SECONDARY AIR DISTRIBUSTION ON THE COMBUSTION CHARACTERISTICS OF A LOW NOX PULVERIZED COAL BURNER USING CFD ANALYSIS,” 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/75932.