Comprehensive Biomaterials

Date

2017-06-01

Author

Hasırcı, Nesrin
Hasırcı, Vasıf Nejat
Eke, Gözde
Endoğan Tanır, Tuğba

Metadata

Show full item record

Item Usage Stats

116
views

0
downloads

URI

https://hdl.handle.net/11511/78036

Collections

Unverified, Book / Book chapter

Suggestions

OpenMETU
Core

Comprehensive Biomaterials Hasırcı, Vasıf Nejat; Endoğan Tanır, Tuğba; Hasırcı, Nesrin (2017-01-01)
Comprehensive Rotorcraft Aeroacoustics: Investigation of Surface Pressure Distribution Methods for Rotor Noise Şenipek, Murat; Yücekayalı, Arda; Ortakaya, Yüksel; Özyörük, Yusuf (2019-09-20)
Comprehensive spectral and thermal characterization of oil shales Güven, Selin; Akın,Serhat; Hasçakır, Berna (Society of Petroleum Engineers; 2015-01-01) The heterogeneous nature of oil shale resources associated to the depositional environments, lithology, and organic content make the reserve estimation complex and unpredictable. However, comprehensive laboratory studies on organic rich shale samples collected from different regions can increase the understanding about the organic content of oil shales, interaction of shale with organic matter and injected fluid used during enhanced oil recovery method. This study investigates the characterization of eight ...
Comprehensive modeling of heat and mass transport in a micropillar evaporator Yuncu, Göksel; Dursunkaya, Zafer; Akkuş, Yiğit; Department of Mechanical Engineering (2022-4-05) Thin-film evaporation and the replenishing capillary liquid flow have paramount importance for various technological applications spanning from desalination to electronics cooling. With the developments enabling faster and cheaper yet more precise fabrication, evaporators with micropillar arrays have attracted substantial attention to sustain efficient evaporation fed by passive liquid transport. Although considerable effort has been devoted to designing optimized wicks, the full picture is still blurry due...
Comparative combustion kinetics for in situ combustion process Kök, Mustafa Verşan (Elsevier BV, 2001-03-22) In this research, thermal characteristics and combustion kinetics of three crude oils (13-27 degrees API) were investigated using DuPont 9900 thermal analysis system (TG/DTG). A sample size of 10 mg. heating rate of 10 degreesC min(-1) were used in the temperature range of 20-700 degreesC under air atmosphere. Theoretically, combustion of fuel can be initiated whenever oxygen comes in contact with fuel. However, the temperature, composition of fuel and oxygen supply dictates the nature of this reaction. In ...

Citation Formats

N. Hasırcı, V. N. Hasırcı, G. Eke, and T. Endoğan Tanır, Comprehensive Biomaterials. 2017.