Evaluation of 2D joint kinematics during stance using markerless shank and foot segmentation, modelling and tracking

2009-10-03
Sürer, Elif
Della Croce, Ugo
Grosso, Enrıco

Suggestions

Evaluation of aggregate size effect on asphalt mixture homogeneity using image analysis
Yücel, Ayhan Öner; Güler, Murat (null; 2018-10-12)
The purpose of this study is to evaluate effect of aggregate size fractions on asphalt mixture inhomogeneity by means of a proposed inhomogeneity test method. The study of inhomogeneity is conducted using 2-dimensional, vertical section images of asphalt concrete specimens that are produced using the Superpave gyratory compactor. Mixture inhomogeneity is evaluated based on aggregates distribution because aggregates are the primary constituent governing the inhomogeneity level of asphalt mixtures during the ...
Evaluation of adsorbents with passive sampling and their analytical methods to determine volatile organic compounds emitted from vehicular exhaust
CİVAN, MİHRİBAN; Tuncel, Süleyman Gürdal (2012-04-01)
In order to accurate and precise determination of Volatile Organic Compounds (VOCs) from vehicular emissions were developed method including a) adsorption of VOCs on different adsorbents followed by thermal desorption and gas chromatography (GC) with flame ionization detector (FID) quantification, b) validation of the sampling and analytical method. The adsorption efficiency of Tenax and Chromosorb 106 adsorbents were eveluated for 104 VOCs to select of adequate sorbent for passive sampling. Since most of t...
Evaluation of visual cues of three dimensional virtual environments for helicopter simulators
Çetin, Yasemin; Çetin, Yasemin; Department of Information Systems (2008)
Flight simulators are widely used by the military, civil and commercial aviation. Visual cues are an essential part of helicopter flight. The required cues for hover are especially large due to closeness to the ground and small movements. In this thesis, density and height parameters of the 3D (Three Dimensional) objects in the scene are analyzed to find their effect on hovering and low altitude flight. An experiment is conducted using a PC-based flight simulator with three LCD monitors and flight control s...
Evaluation of adsorbents with passive sampling and their analytical methods to determine volatile organic compunds emitted from vehicular exhaust
Civan, Mihriban; Tuncel, Süleyman Gürdal (2012-09-01)
In order to accurate and precise determination of Volatile Organic Compounds (VOCs) from vehicular emissions were developed method including a) adsorption of VOCs on different adsorbents followed by thermal desorption and gas chromatography (GC) with flame ionization detector (FID) quantification, b) validation of the sampling and analytical method. The adsorption efficiency of Tenax and Chromosorb 106 adsorbents were eveluated for 104 VOCs to select of adequate sorbent for passive sampling. Since most of t...
Evaluation of Warm Mix Asphalt compactability indices using laboratory compactors from a temperature perspective
Öztürk, Hande Işık (2021-04-01)
In practice, the production temperatures of Warm Mix Asphalt (WMA) mixtures are determined based on practical experiences and recommendations. Thus, the focus of this study is to propose a temperature-sensitive compactabilty assessment method to quantify the temperature needs of WMA mixtures. Therefore, in this study, an image-based testing setup coupled with the Marshall Apparatus was developed to obtain the densification curve of asphalt mixtures considering its sensitivity to temperature changes. Further...
Citation Formats
E. Sürer, U. Della Croce, and E. Grosso, “Evaluation of 2D joint kinematics during stance using markerless shank and foot segmentation, modelling and tracking,” Alghero, İtalya, 2009, p. 15, Accessed: 00, 2021. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S0966636209002239.