Coupled 1-D Hydrodynamics and Sediment Transport Modelling In Flood Analysis: Samsun-Terme River Application

2018-09-12
Onder, Görkem
Akyürek, Sevda Zuhal
Show full item record
29
views
0
downloads
https://hdl.handle.net/11511/81755
Unverified, Conference / Seminar

Suggestions

Scaled 3-D model studies of immiscible CO2 flooding using horizontal wells
Tuzunoglu, E; Bağcı, Ali Suat (2000-05-01)
In this study, a comprehensive laboratory investigation was conducted for the recovery of heavy oil from a scaled three-dimensional (3-D) physical model, packed with 18 degrees API gravity crude oil, brine and crushed limestone. A total of 20 experiments were conducted using the scaled 3-D physical model with 30 x 30 x 6 cm(3) dimensions. Basically, four different immiscible CO2-water displacement processes were used for recovering heavy oil: (i) continuous CO2 injection, (ii) waterflooding, (iii) simultane...
Coupled thermomechanical analysis of concrete hardening
Andiç, Halil İbrahim; Göktepe, Serdar; Yaman, İsmail Özgür; Department of Civil Engineering (2015)
Thermomechanically coupled modeling of fresh concrete allows us to predict the interaction between thermal and mechanical mechanisms throughout the setting and hardening process. Because of cement hydration, an excessive temperature increase may occur in the interior regions of mass concrete structures. This temperature increase along with the thermal boundary conditions may result in thermal gradients within concrete structures. Owing to the thermal gradients and mechanical constraints, thermally induced s...
Coupling of spectral thermal radiation model with a comprehensive system model for co-combustion of biomass in bubbling fluidized bed
Yaşar, Mehmet Soner; Selçuk, Nevin; Külah, Görkem (2023-02-01)
A previously developed 1-D comprehensive model for a bubbling fluidized bed combustor (BFBC) co-firing lignite with cotton residue and limestone is coupled with a 3-D spectral and gray radiation models utilizing method of lines (MOL) solution of discrete ordinates method (DOM). The performance of the coupled models is assessed by comparing their predictions of temperature profiles and gaseous emissions (i) with those of original FBC model without coupling and (ii) with the in-situ measurements from Middle E...
Coupled Turbulent Flow Chromatography: LC-MS/MS Method for the Analysis of Pesticide Residues in Grapes, Baby Food and Wheat Flour Matrices
Hollosi, Laszlo; Mittendorf, Klaus; Senyuva, Hamide Z. (Springer Science and Business Media LLC, 2012-12-01)
This paper describes an on-line sample preparation method for the simultaneous determination of 48 pesticides in grapes, baby food and wheat flour matrices. Target pesticides were selected to represent a wide variety of chemical structures and three typical matrices were selected. Turbulent flow chromatography was applied for on-line sample cleanup directly coupled to LC-MS/MS. The aim of the method was to reduce total analysis time, eliminate manual laboratory work, provide clean extracts and achieve repro...
Mode I fracture toughness determination with straight notched disk bending method
Tutluoğlu, Levend (2011-12-01)
A new method called the straight notched disk bending method is developed for mode I fracture toughness determination using rock cores. Disk specimens of andesite and marble having a single straight edge notch were subjected to three-point bending loads. Dimensionless stress intensity factor estimations and fracture toughness tests were conducted for different notch lengths, span lengths, thicknesses and diameters of the cylindrical rock specimens. Stress intensity factors were computed by three-dimensional...
Citation Formats
G. Onder and S. Z. Akyürek, “Coupled 1-D Hydrodynamics and Sediment Transport Modelling In Flood Analysis: Samsun-Terme River Application,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/81755.
METU IIS - Integrated Information Service open@metu.edu.tr