Integrated modeling of ring pack performance

Date

1991-01-01

Author

Keribar, Rifat
Dursunkaya, Zafer
Flemming, Michael F.

Metadata

Show full item record

Item Usage Stats

71
views

0
downloads

This paper describes an integrated model developed for the detailed characterization and simulation of piston ring pack behavior in internal combustion engines and the prediction of ring pack performance. The model includes comprehensive and coupled treatments of 1) ring-liner hydrodynamic and boundary lubrication and friction; 2) ring axial, radial and (toroidal) twist dynamics; 3) inter-ring gas dynamics and blowby. The model also includes characterizations of oil transport by rings, as film and of ring-bore conformability. The physics of each of these highly inter-related phenomena are represented by submodels which are intimately coupled to form a design-oriented predictive tool aimed at the calculation of ring film thicknesses, ring motions, land pressures, engine friction and blowby. The paper also describes the results of a series of analytical studies investigating effects of engine speed and load and ring pack design parameters, on ring motions, film thicknesses, inter-ring pressures as well as ring friction and blowby.

URI

https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0025722056&origin=inward
https://hdl.handle.net/11511/81784

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

AN INTEGRATED MODEL OF RING PACK PERFORMANCE KERIBAR, R; Dursunkaya, Zafer; FLEMMING, MF (ASME International, 1991-07-01) This paper describes an integrated model developed for the detailed characterization and simulation of piston ring pack behavior in internal combustion engines and the prediction of ring pack performance. The model includes comprehensive and coupled treatments of (1) ring-liner hydrodynamic and boundary lubrication and friction; (2) ring axial, radial, and (toroidal) twist dynamics; (3) inter-ring gas dynamics and blowby. The physics of each of these highly inter-related phenomena are represented by submo...
Dynamic simulation of fluidized bed combustors and its validation against measurements Selçuk, Nevin; Degirmenci, E (2001-01-01) A dynamic mathematical model of a continuous atmospheric bubbling fluidized bed combustor (ABFBC) has been developed on the basis of first principles and used to correlate data from a pilot-scale combustor, The model accounts for bed and freeboard hydrodynamics, volatiles release and combustion, char particles combustion and their size distribution, and heat transfer. The solution procedure of dynamic model employs method of lines (MOL) approach for the solution of the governing nonlinear partial differenti...
Assessment of a frequency-domain linearised Euler solver for turbofan aft radiation predictions and comparison with measurements Özyörük, Yusuf (2010-03-31) This paper presents a frequency-domain computational aeroacoustics tool for predicting aft noise radiation through turbofan ducts and jets and its application to two realistic engine exhaust configurations which have been experimentally tested. The tool is based on the discretised axisymmetric form of the linearised Euler equations in conjunction with perfectly matched layer equations at the inlet and far-field boundaries using high-order finite differences. The resultant linear system of equations is inver...
Fast simulation of muons produced at the SHiP experiment using Generative Adversarial Networks Ahdida, C.; et. al. (2019-11-01) This paper presents a fast approach to simulating muons produced in interactions of the SPS proton beams with the target of the SHiP experiment. The SHIP experiment will be able to search for new long-lived particles produced in a 400 GeV/c SPS proton beam dump and which travel distances between fifty metres and tens of kilometers. The SHiP detector needs to operate under ultra-low background conditions and requires large simulated samples of muon induced background processes. Through the use of Generative ...
Computational modelling of carbon nanotube reinforced polymer composites Zuberi, Muhammad Jibran Shahzad; Esat, Volkan; Electrical and Electronics Engineering (2014-7) This thesis investigates the effects of chirality and size of single-walled carbon nanotubes (SWNTs) on the mechanical properties of both SWNTs and carbon nanotube reinforced epoxy composites (CNTRPs). First, a novel 3D beam element finite element model is developed based on equivalent-continuum mechanics approach and used for replacing C-C chemical bond for modelling SWNTs. The effects of diameter and chirality on the Young’s moduli, shear moduli, shear strains and Poisson’s ratios of SWNTs are studied. Fo...

Citation Formats

R. Keribar, Z. Dursunkaya, and M. F. Flemming, “Integrated modeling of ring pack performance,” 1991, Accessed: 00, 2021. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0025722056&origin=inward.