Development Of Direct Shear And Triaxial Test Procedures On Microbially Treated Sand Specimens

Tunalı, Mert
Duman, Emre
Sarıçiçek, Yılmaz Emre
Pekcan, Onur
Gurbanov, Rafıg
Gözen, Ayşe Gül


Development of axial thrust measuring techniques and effects of balancing holes for radial pumps
Yücel, M Mustafa; Çetinkaya, Tahsin A.; Department of Mechanical Engineering (1999)
Development of PBI based membranes for H₂/CO₂ separation
Başdemir, Merve; Yılmaz, Levent; Kalıpçılar, Halil; Department of Chemical Engineering (2013)
Recent developments have confirmed that in the future hydrogen demand in industrial applications will arise because of the growing requirements for H2 in chemical manufacturing, petroleum refining, and the newly emerging clean energy concepts. Hydrogen is mainly produced from the steam reforming of natural gas and water gas shift reactions. The major products of these processes are hydrogen and carbon dioxide. The selective removal of CO2 from the product gas is important because it poisons catalysts in the...
Development of strain monitoring system for glass fiber reinforced composites via embedded electrically conductive pathways
Tanabi, Hamed; Erdal Erdoğmuş, Merve (Informa UK Limited, 2019-06-15)
Among numerous types of health-monitoring and damage-sensing sensors that can be integrated into composites, electrically conductive sensors offer a simple, cost-effective, and durable option for structural health monitoring in fiber reinforced composites. In this study, a novel approach is introduced to create electrical conductive networks in glass fiber reinforced composites. For this purpose, hollow micro-channels are generated using vaporization of sacrificial components (VaSCs) which are subsequently ...
Development of PCR methods for detection and quantification of genetically modified maize
Jabbari Farhoud, Houman; Gültekin, Güzin Candan; Department of Biotechnology (2010)
This study describes development of methods for screening, identification and quantification of genetic modifications in maize samples. Totally 88 maize samples were collected randomly throughout Turkey in three years from 2006 to 2008 and were analyzed. Two maize samples that were detected as GM positive in previous studies were selected as positive controls. Following the DNA extraction by manual CTAB method, conventional PCR methods were employed for screening of genetic modifications in samples by detec...
Development of measurement and calibration system for fiber optic gyro signals using a DSP
Dinçer, Erdim Ufuk; Ergül, Rüyal; Department of Electrical and Electronics Engineering (2000)
Citation Formats
M. Tunalı, E. Duman, Y. E. Sarıçiçek, O. Pekcan, R. Gurbanov, and A. G. Gözen, “Development Of Direct Shear And Triaxial Test Procedures On Microbially Treated Sand Specimens,” 2019, Accessed: 00, 2021. [Online]. Available: