Design of an Outdoor Stacked Tubular Reactor for Biological Hydrogen Production

2015-09-10
Kayahan, Emine
Eroğlu, İnci
Koku, Harun
Show full item record
62
views
0
downloads
https://hdl.handle.net/11511/85402
Hypothesis XI, (6 - 09 Eylül 2015)
Unverified, Conference / Seminar

Suggestions

Design of an outdoor stacked - tubular reactor for biological hydrogen production
KAYAHAN, Emine; Eroglu, Inci; Koku, Harun (Elsevier BV, 2016-11-02)
Photofermentation is one alternative to produce hydrogen sustainably. The photobioreactor design is of crucial importance for an economically feasible operation, and an optimal design should provide uniform velocity and light distribution, low pressure drop, low gas permeability and efficient gas-liquid separation. A glass, stacked tubular bioreactor aimed at satisfying these criteria has been designed for outdoor photofermentative hydrogen production by purple non sulfur bacteria. The design consists of 4 ...
Design of a dual polarized low profile antenna for microwave brain imaging
Üçel, Kaan; Alatan, Lale; Department of Electrical and Electronics Engineering (2022-5-9)
In this thesis, a low profile, low cost, wide band (0.9-2GHz) dual linearly polarized printed dipole antenna is designed to be used in microwave brain imaging systems. Dual polarization feature offers superior data acquisition through polarization diversity for better image quality. Starting from a simple printed dipole, antenna structure is modified step by step to meet these design requirements. Since a conductive surface in close vicinity of the antenna affects antenna performance, in order to obtain uni...
Design of a wideband beam scanning Rotman lens array
Tekbaş, Damla Duygu; Birand, Mehmet Tuncay; Department of Electrical and Electronics Engineering (2012)
The design, manufacturing techniques and measurements for wideband Rotman lens are presented. Different design approaches are explained in detail. A step-by-step procedure followed through the design process of a Rotman lens is given. The design equations are derived for both the parallel-plate/waveguide and microstrip/stripline Rotman lens versions. Effects of the design parameters on the lens shape and performance are investigated. A microstrip Rotman lens operating in 8 GHz – 16 GHz frequency band is des...
Design of an advanced composite shell for helicopter pilot helmets
Sünel, Ezgi; Parnas, Kemal Levend; Department of Mechanical Engineering (2012)
This thesis reports on a design study, conducted for an advanced composite helmet shell for helicopter pilots. The helmet shell is expected to provide a level of protection against low velocity impacts with its weight criteria. Therefore, ergonomy, light weight, and the ability to withstand low velocity impact became the main issues for this study. For this purpose, an experimental program has been developed including low velocity impact tests on specimens. The drop height, drop weight, specimen stacking se...
Design of a modular, axial-flux direct drive permanent magnet generator for wind turbines
Başkaya, Aydın; Keysan, Ozan; Department of Electrical and Electronics Engineering (2018)
Wind energy technology is becoming more important issue in terms of renewable energy applications. Theoretical maximum of wind energy utilization is known (which is predetermined by Betz as 59%) and generally imperfections in blade manufacture reduce the actual energy yield of the turbine less than the useable energy. Therefore, maximum energy yield from generator topology is desired. According to fault statistics of wind turbines, most of the cases are related to gearbox failures. Mechanical losses and hea...
Citation Formats
E. Kayahan, İ. Eroğlu, and H. Koku, “Design of an Outdoor Stacked Tubular Reactor for Biological Hydrogen Production,” presented at the Hypothesis XI, (6 - 09 Eylül 2015), 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/85402.
METU IIS - Integrated Information Service open@metu.edu.tr