Production of Ti-6Al-4V Alloy by 3D Electron Beam Melting Technique and Development of its Post Treatments

Date

2019-03-15

Author

Doğu, Merve Nur
Esen, Ziya
Dericioğlu, Arcan Fehmi
Tan, Evren
Gümüs, Berkay

Metadata

Show full item record

Item Usage Stats

106
views

0
downloads

URI

https://www.tms.org/tms2019
https://hdl.handle.net/11511/87207

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Production of Ti-6Al-4V alloy by 3D electron beam melting technique and development of itspost treatments Doğu, Merve Nur; Dericioğlu, Arcan Fehmi; Department of Metallurgical and Materials Engineering (2019) In this thesis, the effects of production variables in electron beam melting (EBM) and post-processing on the materials’ and mechanical properties of Ti-6Al-4V alloy were investigated by considering the microstructural change. Ti-alloy samples were produced at 0o, 45o and 90o with respect to building plate. Surface polishing with HF solution was applied to reduce the surface roughness. On the other hand, post-heat treatments, namely, 2-step thermo-hydrogen processing (THP) and annealing, were conducted to i...
Production of boron fiber by chemical vapor deposition and its characterization Ersoy, Ayse; Doğu, Timur; Department of Chemical Engineering (1997)
Production of cu-based shape memory alloys by powder metallurgy Dericioğlu, Arcan Fehmi; Ögel, Bilgehan; Bor, Şakir; Department of Metallurgical and Materials Engineering (1999)
Production of boron nitride by carbothermic and mechanochemical methods, and nanotube formation Camurlu, HE; Aydogdu, A; Topkaya, Yavuz Ali; Sevinc, N (2003-09-12) The formation of hexagonal boron nitride by carbothermic reduction of boron oxide and nitridation has been examined. Experiments were conducted in the temperature range of 1100-1500degreesC for durations between 15-240 minutes. Products were examined by X-ray, SEM and chemical analysis. The results showed that the reaction proceeds through a gaseous boron containing species, which is most probably 13203(g). It was found that all of the carbon was consumed and formation of boron nitride was complete in 2 hou...
Production of Nano Size TiO2 Sol and Highly Efficient Photocatalytic TiO2 Powder by Mechanical Ball Milling Corapci, E.; Aysin, B.; Öztürk, Abdullah; PARK, JONGEE (2010-06-16)

Citation Formats

M. N. Doğu, Z. Esen, A. F. Dericioğlu, E. Tan, and B. Gümüs, “Production of Ti-6Al-4V Alloy by 3D Electron Beam Melting Technique and Development of its Post Treatments,” 2019, Accessed: 00, 2021. [Online]. Available: https://www.tms.org/tms2019.