Application of Voronoi Polygons and 3-Point Correlation for Identifying Uniformity of the Concrete Samples

2018-09-14
Özen, Murat
Güler, Murat
Show full item record
35
views
0
downloads
https://hdl.handle.net/11511/87668
Unverified, Conference / Seminar

Suggestions

Application of 2D Digital Image Correlation Three Point Flexure Test of Reinforced Concrete Beam
Albostan, Utku; Kurç, Özgür (null; 2016-09-21)
Digital image correlation (DIC) method has been used in many disciplines to measure displacement and strain without any contact to the specimen. Moreover, it is usually a cheaper method when compared with other measurement techniques. In this technique, a single or stereo digital cameras are needed for the 2D and 3D measurements, respectively. Images used for correlation are generally acquired from videos shot by high speed cameras. Accordingly, their resolutions and measurement accuracies are not sufficien...
Application of frequency-domain linearized Euler solutions to the prediction of aft fan tones and comparison with experimental measurements on model scale turbofan exhaust nozzles
Özyörük, Yusuf (Elsevier BV, 2011-08-01)
Although it is widely accepted that aircraft noise needs to be further reduced, there is an equally important, on-going requirement to accurately predict the strengths of all the different aircraft noise sources, not only to ensure that a new aircraft is certifiable and can meet the ever more stringent local airport noise rules but also to prioritize and apply appropriate noise source reduction technologies at the design stage. As the bypass ratio of aircraft engines is increased - in order to reduce fuel c...
Application of ring beam stiffness criterion for discretely supported shells under global shear and bending
Topkaya, Cem (SAGE Publications, 2018-12-01)
Silos in the form of a cylindrical metal shell are commonly elevated to provide access to the space beneath. In general, a few discrete column supports at evenly spaced intervals are commonly utilized. The presence of discrete supports results in circumferential non-uniformity in the axial compressive stress above the support. Depending on the size of the structure, several different support arrangements may be chosen. A stiff ring beam is utilized in larger silos to transfer and evenly distribute the discr...
Application of regional flood frequency analysis through L-Moments
Okur, Altan; Şorman,A.Ünal; Department of Civil Engineering (1999)
Application of the finite difference method to doubly connected concrete floor slabs.
İnan, Mehmet Istiklal; Department of Civil Engineering (1973)
Citation Formats
M. Özen and M. Güler, “Application of Voronoi Polygons and 3-Point Correlation for Identifying Uniformity of the Concrete Samples,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/87668.
METU IIS - Integrated Information Service open@metu.edu.tr