Designing and Comparing the Catalytic Activity of Molten Metal Catalysts for Methane Pyrolysis

Date

2022-12-01

Author

Erbasan, A
Sökmen, Uğur
Eroğlu, E
Mutlu, Rasiha Nefise
Çelik, Gökhan
Toffoli, Hande
Gökalp, İskender
Kardaş, Gülfeza

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

107
views

0
downloads

URI

https://hdl.handle.net/11511/101532

Conference Name

16th Nanoscience and Nanotechnology Conference

Collections

Department of Chemical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Designing heat-exchanger networks for energy savings in chemical plants Özgen, Canan; Baç, Nurcan; Gürkan, Türker; Tosun, İsmail (Elsevier BV, 1989-12) The pinch-design method is applied to the evaluation of heat-exchanger networks for an existing monomer plant. The problem resulting from partially condensed multicomponent vapor streams possessing variable CP () values is solved by applying a novel technique. The rigorous design obtained is further revised by the consideration of plant constraints.
Designing autopilot and guidance algorithms to control translational and rotational dynamics of a fixed wing VTOL UAV Güçlü, Anı; Kurtuluş, Dilek Funda; Department of Aerospace Engineering (2020) Guidance and autopilot algorithms are designed and applied to a fixed wing VTOL air vehicle. The algorithms are developed on a rotary wing and a fixed air vehicle. Each air vehicle is identified by experimentation to reduce the discrepancies among the system model and the actual air vehicles. Designed controllers for the air vehicles are deployed to Pixhawk Cube controller board. Indoor and outdoor flight tests are carried out. For the rotary wing air vehicle, active disturbance rejection control algorithms...
MODELING SOLID-LIQUID EXTRACTION KINETICS OF TRANS-RESVERATROL AND TRANS-e-VINIFERIN FROM GRAPE CANE Karacabey, Erkan; Bayındırlı, Levent A.; ARTIK, NEVZAT; Mazza, Giuseppe (Wiley, 2013-02-01) Solidliquid extraction of resveratrol and viniferin from grape cane samples was described by using first-order kinetic model, Peleg's model, two-site kinetic model and modified Gompertz equation. Goodness of fits of the models were evaluated by comparing the adjusted determination coefficient and root mean square error and mean percentage error values. Although the two-site kinetic model with four parameters described the data better, Peleg's model, with only two parameters, could explain the data with a sl...
Designing a Dynamic Reading-into-Speaking Test for Tertiary Level EAP Classes Kızılcık, Hale Hatice; Çopur, Deniz (2018-03-27)
MODELING AND SIMULATION OF THE FLUID FLOW IN ARTIFICIALLY FRACTURED AND GEL TREATED CORE PLUGS Kaya, Onur Alp; Durgut, İsmail; Department of Petroleum and Natural Gas Engineering (2021-9) The dynamics of fluid flow in the matrix and in the fractures are significantly different from each other. Fractures are highly permeable flow pathways and are generally considered as the main flow unit. On the other hand, the matrix occupies most of the porous medium’s volume and is considered as the main storage unit. The main objective of this thesis is numerical modeling of water flooding experiments in artificially fractured and gel-treated core plugs. MATLAB Reservoir Simulation Toolbox (MRST) is used...

Citation Formats

A. Erbasan et al., “Designing and Comparing the Catalytic Activity of Molten Metal Catalysts for Methane Pyrolysis,” presented at the 16th Nanoscience and Nanotechnology Conference, Ankara, Türkiye, 2022, Accessed: 00, 2023. [Online]. Available: https://hdl.handle.net/11511/101532.