Show/Hide Menu
Hide/Show Apps
Logout
Türkçe
Türkçe
Search
Search
Login
Login
OpenMETU
OpenMETU
About
About
Open Science Policy
Open Science Policy
Communities & Collections
Communities & Collections
Help
Help
Frequently Asked Questions
Frequently Asked Questions
Guides
Guides
Thesis submission
Thesis submission
MS without thesis term project submission
MS without thesis term project submission
Publication submission with DOI
Publication submission with DOI
Publication submission
Publication submission
Supporting Information
Supporting Information
General Information
General Information
Copyright, Embargo and License
Copyright, Embargo and License
Contact us
Contact us
The permeability of asphaltic concrete mixtures under pressure and the effect of filler/bitumen ratio on permeability
Download
056539.pdf
Date
1996
Author
Okuyucu, Hakan
Metadata
Show full item record
Item Usage Stats
65
views
0
downloads
Cite This
URI
https://hdl.handle.net/11511/10373
Collections
Graduate School of Natural and Applied Sciences, Thesis
Suggestions
OpenMETU
Core
The Influence of cooling configuration and tip geometry on gas turbine blade tip leakage flow and heat transfer
Sakaoğlu, Sergen; Kahveci, Harika Senem; Department of Aerospace Engineering (2019)
In gas turbine engines, an increase in the thermal efficiency and power output can be ensured by increasing the turbine inlet temperature. This causes the high-pressure turbine (HPT) blades to be exposed to extremely high temperatures that requires the introduction of cooling flow in order to keep the temperatures within the allowable material limits and to reduce the high thermal loads on the blade. However, cooling flow introduced around the blade tip region affects the blade tip leakage flow and blade tip he...
The Effects of heat treatment on microstructure, hardness and fatigue behavior of (AMS5659) 15-5 precipitation hardenable stainless steel
Gören, Şahin; Gürbüz, Rıza; Department of Metallurgical and Materials Engineering (2018)
In this study, effects of heat treatment parameters on microstructure, hardness and fatigue behavior of 15-5 precipitation hardenable stainless steels have been examined. Heat treatments have been conducted in three different steps homogenization, solutionizing and aging treatment at different temperatures and times. Microstructural analysis in terms of grain size and chemical composition analysis have been performed by optical and scanning electron microscope (SEM). Then, hardness measurements were applied...
The mechanical behavior of a fibre-reinforced viscoelastic material
Yıldız, Bülent; Erdem, A. Ünal; Department of Engineering Sciences (1988)
The Fracture behaviour of fiber reinforced acrylic composites
Atasav, Ebru; Gürbüz, Rıza; Department of Metallurgical and Materials Engineering (1998)
The Effects of Co-Mo/CaCO3 Catalyst's Calcination Temperature and Co/Mo Weight Ratio on Carbon Nanotube Production
Hocaoglu, Caner; Sezgi, Naime Aslı (2015-01-01)
Carbon nanotubes (CNTs) were synthesized in the temperature range of 500-700 degrees C over cobalt (Co)- and molybdenum (Mo)impregnated CaCO3 catalysts using acetylene gas. The effects of Co-Mo/CaCO3 catalyst's calcination temperature and Co/Mo weight ratio on the carbon deposition rate were investigated. The synthesized CNTs were multiwalled nanotubes with variable outer diameters. They exhibited Type II isotherm, and their surface areas were in the range of 24.8-89.9m(2)/g. It was concluded that the Co/Mo...
Citation Formats
IEEE
ACM
APA
CHICAGO
MLA
BibTeX
H. Okuyucu, “The permeability of asphaltic concrete mixtures under pressure and the effect of filler/bitumen ratio on permeability,” Middle East Technical University, 1996.
