Controlling the seismic behaviour of exterior reinforced concrete frame joints with relocated beam plastic hinges

Download
1997
Başaran, Emre

Suggestions

Controlling the foam morphology of supercritical CO2-processed poly(methyl methacrylate) with CO2-philic hybrid nanoparticles
Özkutlu Demirel, Merve; Bayram, Göknur; Dilek Hacıhabiboğlu, Çerağ (2021-04-01)
Highly CO2-philic nanoparticles, octatrimethylsiloxy polyhedral oligomeric silsesquioxanes (POSS) are used to increase the affinity of poly(methyl methacrylate) (PMMA) to CO2 in supercritical carbon dioxide (scCO(2)) foaming, thus to improve its foaming performance and the foam morphology. PMMA and PMMA-POSS composite foams were produced based on the two-factorial design, at the upper and lower experimental conditions of pressure, temperature, processing time, and venting rate. The foams of PMMA-5% POSS com...
Monitoring the microstructural changes during tempering of quenched SAE 5140 steel by magnetic barkhausen noise
Davut, Kemal; Gür, Cemil Hakan (Springer Science and Business Media LLC, 2007-12-01)
The aim of this work is to characterize the microstructures of quenched and tempered steels non-destructively by a diverse set of parameters of the Magnetic Barkhausen Noise method (MBN fingerprint, frequency spectra, pulse height distribution, root-mean-square, and total number of pulses). Identical specimens from a SAE 5140 steel bar were prepared. All specimens were austenitized at 860 degrees C for 30 minutes and water-quenched identically. The quenched specimens were then tempered at various temperatur...
Controlling the power law fluid flow and heat transfer under the external magnetic field using the flow index and the Hartmann number
Evcin, Cansu; Uğur, Ömür; Tezer, Münevver (2018-10-01)
The direct and optimal control solution of laminar fully developed, steady Magnetohydrodynamics (MHD) flow of an incompressible, electrically conducting power-law non-Newtonian fluid in a square duct is considered with the heat transfer. The fluid is subjected to an external uniform magnetic field as well as a constant pressure gradient. The apparent fluid viscosity is both a function of the unknown velocity and the flow index which makes the momentum equation nonlinear. Viscous and Joule dissipation terms ...
Controlling the power law fluid flow and heat transfer under the external magnetic field using the flow index and the Hartmann number
Evcin, Cansu; Uğur, Ömür; Tezer, Münevver (2018-10-01)
The direct and optimal control solution of laminar fully developed, steady Magnetohydrodynamics (MHD) flow of an incompressible, electrically conducting power-law non-Newtonian fluid in a square duct is considered with the heat transfer. The fluid is subjected to an external uniform magnetic field as well as a constant pressure gradient. The apparent fluid viscosity is both a function of the unknown velocity and the flow index which makes the momentum equation nonlinear. Viscous and Joule dissipation terms ...
Controlling the shapes and internal complexity of the polymeric particles using liquid crystal-templates confined into microwells
KARAUSTA, ASLI; Kocaman, Ceren; Büküşoğlu, Emre (2021-02-01)
Formation and positioning of the topological defects within liquid crystalline (LC) medium confined into microwells were shown to critically effect the shapes and symmetry of the particles obtained after polymerization. Water-soluble, sacrificial poly(vinyl alcohol) microwells with different sizes and shapes were filled with a nematic solution of reactive (RM257) and non-reactive mesogens (5CB) and photopolymerized under ultraviolet light. The characterization of the LC director profile and defect locations...
Citation Formats
E. Başaran, “Controlling the seismic behaviour of exterior reinforced concrete frame joints with relocated beam plastic hinges,” Middle East Technical University, 1997.