Cost comparison of clay brick and AAC masonry walls employed in seiemic resistant masonry and reinforced concrete building construction.

Bozkurt, H. Burak


Cost comparison of optimized resinforced concrete tee and masonry retainning walls.
Yetgin, Koray; Department of Civil Engineering (1973)
Cost Comparison of Reinforced Concrete Structures Designed According to Turkish and European Earthquake Codes
Buzuku, Jeton; Gorona, Leart; Tokdemir, Onur Behzat (2020-12-02)
Design codes provide methods to analyze and design structures according to different types of risks the structure may suffer, and they differ from each other in several aspects, such as load combinations and earthquake loads evaluation. In this study, the cost of the building designed according to both Turkish and European codes are compared, and cost-effectiveness is measured. The objective of the study is to identify which code provides a more economically feasible design. In consideration of seismic...
Cost assessment of concrete and steel types for office buildings: An exploratory study
Kanit, Recep; Ozkan, Omer; Gunduz, Murat (Elsevier BV, 2007-09-01)
This paper presents a set of regression models which incorporates concrete and steel types in modeling the costs of office buildings. To these ends, three typical office buildings with seven and 15 stories have been designed by the help of a commercial software taking into account the Turkish practice. In each project C-16, C-20, C-25, C-30 and C-35 concrete classes and S-220 and S-420 steel types were used for dimensioning purposes. Rough construction costs were then calculated for different combinations o...
Cost effect of earthquake region and soil type for office buildings in Turkey
Kanit, Recep; Gunduz, Murat; Ozkan, Omer (Elsevier BV, 2007-10-01)
In this study, the change in the load-bearing system cost of a reinforced concrete office building has been investigated in relation to the earthquake regions and soil types. Three different office projects each with five stories were investigated. The structural design calculations have been made according to four different soil types and four different earthquake regions. According to each combination, concrete, steel and formwork adopted approximations were calculated to reach the rough cost of each offi...
Cost-based comparison of sludge drying alternatives for biological municipal wastewater treatment plants in Turkey
Çelebi, Emrehan Berkay; Kurt, Mayıs; Aksoy, Ayşegül; Sanin, Faika Dilek (2018-05-23)
Citation Formats
H. B. Bozkurt, “Cost comparison of clay brick and AAC masonry walls employed in seiemic resistant masonry and reinforced concrete building construction.,” Middle East Technical University, 2001.