Alternative prototyping of large sized plastic parts by using CNC milling machines - a comparative study.

Download

118925.pdf

Date

2001

Author

Aytaç, Mete

Metadata

Show full item record

Item Usage Stats

34
views

0
downloads

URI

https://hdl.handle.net/11511/12207

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Alternative surface texturing, passivation and charge selective contacts for crystalline silicon solar cells Sarıgül Duman, Elif; Turan, Raşit; Yerci, Selçuk; Department of Micro and Nanotechnology (2022-9-2) This study focuses on realizing three crucial steps in silicon solar cell manufacturing by utilizing alternative methods. Black silicon is of interest as an alternative surface texturing method for achieving enhanced light trapping and reduced reflection of the crystalline silicon solar cell. Black silicon fabrication via the inductively coupled plasma reactive ion etching method and the feasibility of black silicon solar cells were investigated. Reduced optical reflectance was achieved with a total weighte...
Alternative design of left-handed metamaterial based on circular resonator and wire strip for waveguide configurations with sensing and absorber applications Gunduz, Ozan T.; Sabah, Cumali (2015-08-01) An alternative design of left-handed (LH) metamaterial (MTM) for waveguide configurations is presented with sensor and absorber applications. The LH structure is based on two identical circular ring resonators connected with a wire strip. Both simulation and experimental results show that the planar MTM has an LH resonance at similar to 9.9 GHz. Surface current and magnetic field distributions at the resonance are also presented to show the LH behavior of the structure in detail. In addition, a parametric s...
Alternative methods and their comparison for the rejection of condenser heat in nuclear power plants of 600MWe built in Turkey. Göksel, Onur; Department of Industrial Engineering (1973)
Active minimization of acoustic potential energy inside structurally coupled enclosures: an analytical approach Sorguç, Arzu; Çalışkan, Mehmet (null; 1993-08-19)
Competitive adsorption of dissolved organics from water in a batch slurry reactor. Khalil, Abdulghani Ahmad; Department of Chemical Engineering (1987)

Citation Formats

M. Aytaç, “Alternative prototyping of large sized plastic parts by using CNC milling machines - a comparative study.,” Middle East Technical University, 2001.