Development of a fuzzy controlled ABS to improve braking performance and stability of vehicles

Download

082821.pdf

Date

1999

Author

Yazıcıoğlu, Yiğit

Metadata

Show full item record

Item Usage Stats

62
views

0
downloads

URI

https://hdl.handle.net/11511/2415

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Development of a fuzzy logic gear shifting in automatic transmission for automobiles Erdoğan, Ufuk R; Ünlüsoy, Y. Samim; Department of Mechanical Engineering (2001)
Development of an Intelligent Least Squares Based Linear Controller for Autonomous Helicopters Kubali, Eser; Yavrucuk, İlkay (2016-06-10) In this paper, a novel PID gain update law using linear least squares regression is introduced as an adaptive control method for autonomous helicopters. In addition, prediction analysis is conducted for error dynamics of the closed loop system using recursive linear least squares regression. Combining these two concepts with classical PID controller, an intelligent PID controller is obtained. A flight controller with three control loops is developed to demonstrate the capabilities of the controller. Finally...
Development of a State Dependent Riccati Equation Based Tracking Flight Controller for an Unmanned Aircraft Tekinalp, Ozan (2013-08-22) A dual loop nonlinear State Dependent Riccati Equation (SDRE) control method is developed for the flight control of an unmanned aircraft. The outer loop addresses the attitude and altitude kinematics, while the inner loop handles the translational and rotational equations of motion. The control strategy utilizes a tracking control problem. The mismatch due to the SDC factorization of the inner loop is handled with a nonlinear compensator again derived from the tracking control formulation. The quadratic opt...
Development of An Upwind Linearized Harmonic Flow Solver For Turbomachinery Flows Saygın, Aras; Baran, Özgür Uğraş; Aksel, Mehmet Haluk; Department of Mechanical Engineering (2022-8-31) Many modern turbomachines, especially turbofans and turbojets used in modern aircraft, contain many rotor-stator stages. The rotor stator rows of a typical modern aircraft engine are between 2 to 20 for fan-compressor part and between 2 to 7 for the turbine. Unsteady CFD analyses of rotor-stator systems are generally performed with minimal time steps due to the high relative speed of the rows. These CFD analyses should be performed for at least two complete rotations of the rows to achieve reasonable conver...
Development of a three way catalytic converter for elimination of hydrocarbons, carbon monoxide and nitric oxide in automotive exhaust Kandilli, Nur; Önal, Işık; Department of Chemical Engineering (2010) In this work, slurries of powder catalysts are washcoated on 22 mm diameter and 13 mm height cordierite monoliths. CeO2-ZrO2 (CZO) and CeO2-ZrO2- Al2O3 (CZAO) mixed oxides are synthesized by co-precipitation and sol-gel methods respectively, to be used as support materials of Pd and Rh metals. Metal loaded CZO is mixed with gamma phase alumina. Powder catalysts and their slurries are characterized by XRD, BET, ICP-MS and the monolithic catalysts are imaged by SEM. Catalytic activities of monolithic catalyst...

Citation Formats

Y. Yazıcıoğlu, “Development of a fuzzy controlled ABS to improve braking performance and stability of vehicles,” Middle East Technical University, 1999.