Flow characteristics of dilute solid-liquid upward flows in a vertical annulus.

1998
Beyaz, Ayşe
Show full item record
106
views
0
downloads
https://hdl.handle.net/11511/2612
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Flow structure and thickness of annular downflow layer in a circulating fluidized bed riser
Kim, SW; Külah, Görkem; Bi, HT; Lim, CJ; Grace, JR (2004-04-08)
Flow structures were determined in a circulating fluidized bed (CFB) riser (0.203 m i.d. x 5.9 m high) of FCC particles (d(p)=70 mum, rho(s)= 1700 kg/m(3)). A momentum probe was used to measure radial momentum flux profiles at several levels and to distinguish between upward and downward flow regions. Time-mean dynamic pressure (DeltaP(m)) decreases towards the wall in the range U-g=5-8 m/s, G(s)=10-340 kg/m(2) s. The thickness of the annular downflow layer based on DeltaP(m)=0 reaches a maximum with increa...
Flow Characterization of Full, Partial and Inclined Ground Effect
Koçak, Göktuğ; Nalbantoğlu, Volkan; Yavuz, Mehmet Metin (null; 2017-07-25)
Flow visualization and determination of temperature distribution in inclined channels
Sağlamcı, Abdülaziz Mehmet; Bayer, Özgür; Department of Mechanical Engineering (2018)
Subway transportation systems play an important role in human life in this century. Millions of people make use of subway transportation every day in metropolises. In subways, there is a very crucial situation "case of fire and smoke generation" that must be prevented. In subway areas, it is known that stairs are used to connect the ground with the subway area, metro stations in other words. Stairs have an angle with the ground horizontal called as tilt angle. The most important case of smoke movement in ca...
Flow transitions and flow localization in large-strain deformation of magnesium alloy
Sagapuram, Dinakar; Efe, Mert; Trumble, Kevin P.; Chandrasekar, Srinivasan (Elsevier BV, 2016-04-06)
Understanding transitions from homogeneous to localized flow, and mechanisms underlying flow localization, is of paramount importance for deformation processing of magnesium. In this study, a shear based deformation method is utilized for imposing large strains (similar to 1), under controllable strain rates (10-10(5)/s) and temperatures (80-300 degrees C), in order to examine flow patterns in a magnesium alloy. Based on microstructure characterization, deformation twinning is suggested to contribute to the...
Flow behavior and regime transition in a high-density circulating fluidized bed riser
Kim, SW; Külah, Görkem; Bi, H; Lim, CJ; Grace, JR (2004-09-01)
Flow behavior and flow regime transitions were determined in a circulating fluidized bed riser (0.203 m i.d. x 5.9 m high) of FCC particles (d(p) = 70 pm, rho(p) = 1700 kg/m(3)). A momentum probe was used to measure radial profiles of solids momentum flux at several heights and to distinguish between local net upward and downward flow. In the experimental range covered (U-g = 5-8 m/s; G(s) = 22-345 kg/m(2) s), the fast fluidization flow regime was observed to coexist with dense suspension upflow (DSU). At a...
Citation Formats
A. Beyaz, “Flow characteristics of dilute solid-liquid upward flows in a vertical annulus.,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr