Investigation of effective flange width formulas for T-beams

Download
090701.pdf
1999
Aygar, Altan
Show full item record
75
views
0
downloads
https://hdl.handle.net/11511/2760
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Investigation of Estimation Methods for Time-varying Residual Magnetic Moment
Söken, Halil Ersin (2015-01-01)
Generally, the dominant attitude disturbance source for the low Earth orbit small satellites is the residual magnetic moment (RMM). The RMM should be estimated and compensated in orbit to increase the attitude estimation and control accuracy. Although the estimator is usually built with the assumption that these parameters are constant, the RMM changes with sudden shifts caused by the variations in the onboard electrical current. The estimator should quickly track these unobserved parameters in case of chan...
Investigation of Mean Stress Effect for Equivalent Stress Methods and Critical Plane Approaches for High Cycle Fatigue Life Estimations
Engin, Zafer; Çöker, Demirkan (null; 2017-09-20)
Investigation of the Applicability of AASHTO LRFD Live Load Distribution equations for Integral Bridge Substructures
Erhan, Semih; Dicleli, Murat (SAGE Publications, 2009-08-01)
In this study, applicability of the AASHTO LRFD girder live load distribution equations (LLDEs) for integral bridge (IB) abutments and piles is investigated. For this Purpose, numerous 3-D and corresponding 2-D structural models of typical IBs are built and analyzed under AASHTO LRFD live load. In the analyses, the effect of various superstructure properties such as span length, slab thickness, girder spacing and stiffness are considered. The results from the 2-D and 3-D analyses are then used to calculate ...
Investigation of modular multilevel converter control methods
Ertürk, Feyzullah; Hava, Ahmet Masum; Department of Electrical and Electronics Engineering (2015)
The thesis focuses on the analysis and control of modular multilevel converter (MMC). The control structures used in the control of MMC are presented. Outer control loops of the converter such as output current, DC-link voltage, and power controls as well as inner control structures unique to the converter such as circulating current control and sorting algorithm based submodule voltage balancing are investigated. In addition, switching methods proposed for MMC are also described. These control and switchin...
Investigation of various options for numerical modeling of fluidized bedsI for a solar thermal application
Bilyaz, Serhat; Tarı, İlker (null; 2015-05-29)
Circulating fluidized bed solid particle absorption solar thermal energy system is a promising approach to solar thermal with thermal energy storage. For accurately modeling such systems, the fluidized bed numerical model should be correctly representing the behavior of the actual bed. There are several suggested partial semi-empirical models in the literature considering distinct phenomena related to fluidization and void fraction distribution in a fluidized be...
Citation Formats
A. Aygar, “Investigation of effective flange width formulas for T-beams,” Middle East Technical University, 1999.
METU IIS - Integrated Information Service open@metu.edu.tr