Development of a primative library and a procedure for design of parts parts to be machined in a four-axis CNC lathe

Sander, Tolga Ziya


Development of a model for the evaluation of mineral property acqisitions
Sergi, Alpay; Çelebi, Neşe; Department of Mining Engineering (1995)
Development of a design software for the selection of components for the hoisting mechanisms of cranes
Erkan, Murat; Erden, Abdülkadir; Department of Mechanical Engineering (1993)
Development of a preprocessor and modification of a finite element procedure for the analysis of metal forming processes
Günay, Ezgi; Tekkaya, A. Erman; Department of Engineering Sciences (1989)
Development of a screening model for the cyclic steam injection (CSI) process
Yalgın, Gamze; Kök, Mustafa Verşan; Artun, Emre; Department of Petroleum and Natural Gas Engineering (2017)
Cyclic steam injection (CSI), a single-well enhanced oil recovery method for heavy oil reservoirs, is characterized with three stages: injection, soaking, and production which altogether constitute a cycle. In this study, it is aimed to develop a screening model that can be used to accept or reject a given CSI proposal from a representative performance indicator. This indicator is estimated from a large set of reservoir & CSI design characteristics, using the screening model developed. The model has been tr...
Development of a new testing procedure to measure thermal fatigue performance of asphalt concrete
Shabani, Reza; Güler, Murat; Department of Civil Engineering (2020-11)
In the scope of this study, a new test procedure is developed to investigate the thermal fatigue performance of asphalt concrete materials. To achieve this, test samples are compacted using different mixtures to be designed according to the Superpave mix design method. In the testing program, compacted samples are cut to produce beam specimens for thermal coefficient tests and semicircular specimens for thermal fatigue tests. Analysis of variance (ANOVA) and Multivariate analyses are both used to evaluate t...
Citation Formats
T. Z. Sander, “Development of a primative library and a procedure for design of parts parts to be machined in a four-axis CNC lathe,” Middle East Technical University, 1999.