Mechanochemical and combustion synthesis of CeB6

Date

2013-04-01

Author

Akgun, Baris
SEVİNÇ, NACİ
ÇAMURLU, HASAN ERDEM
Topkaya, Yavuz Ali

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

153
views

0
downloads

CeB6 powder was prepared via combustion synthesis (CS) and mechanochemical processing (MCP) methods starting from CeO2, B2O3 and Mg powder mixtures. In CS, reactant mixtures were ignited in a preheated pot furnace under argon atmosphere. Products contained CeB6, MgO and Mg3B2O6, as revealed by X-ray diffraction analysis. After leaching in 1 M HCl for 15 h, MgO was removed but Mg3B2O6 could not be removed from the products. Ball milling of products in ethanol prior to leaching made the removal of Mg3B2O6 possible by leaching. Yield of CeB6 was 68.6% in CS. MCP was performed in a stainless steel vial with a planetary ball mill at 300 rpm for 30 h. MCP products contained CeB6, MgO and small amount of Fe. Leaching in 1 M HCl for 30 min was sufficient to remove MgO. Yield of CeB6 was 84.4% in MCP. According to scanning electron microscopy examinations, particles of CeB6 prepared by CS and MCP had submicrometer size. Average particle sizes were determined as 290 nm and 240 nm, respectively.

Subject Keywords

Physical and Theoretical Chemistry, Materials Chemistry, Condensed Matter Physics, Metals and Alloys

URI

https://hdl.handle.net/11511/36366

Journal

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH

DOI

https://doi.org/10.3139/146.110868

Collections

Department of Metallurgical and Materials Engineering, Article

Suggestions

OpenMETU
Core

Complex-radical cyclocopolymerization of allyl a-(N-maleimido)acetate with styrene and maleic anhydride Rzaev, ZMO; Salamova, UU; Altindal, S (Wiley, 1997-08-01) Radical copolymerizations of allyl alpha-(N-maleimido)acetate (AMI) with styrene (D, electron-donor) or maleic anhydride (A, electron-acceptor) were carried out in benzene and/or methyl ethyl ketone (MEK) at 50-70 degrees C in the presence of 2,2'-azoisobutyronitrile (AIBN) as initiator. The structure and properties of copolymers synthesized were derived from IR, chemical, DTA and TGA analyses. Side-chain unsaturation of macromolecules was also proved by the crosslinking effect observed. Kinetic parameters ...
Solid-state synthesis and X-ray diffraction studies of Na2S Kizilyalli, M.; Bilgin, M.; Kizilyalli, H.M. (Elsevier BV, 1990-4) Na2S was synthesized by a new solid-gas reaction of Na2CO3 with a sulfidizing gas mixture and a solid-solid reaction of carbon with Na2SO4. The reaction products were analyzed by X-ray powder diffraction and IR methods. Two new crystal modifications of Na2S were identified in addition to the previously reported antifluorite structure. They were designated as cubic Form II and orthorhombic Form III. The approximate unit cell dimensions were found to be a = 11.29 Å for the cubic form and a = 15.94, b = 16.00,...
Phase Transformation Behavior of Porous TiNi Alloys Produced by Powder Metallurgy Using Magnesium as a Space Holder Aydoğmuş, Tarık; Tarhan Bor, Elif; Bor, Sakir (Springer Science and Business Media LLC, 2011-09-01) Porous TiNi alloys with porosities in the range of 51 to 73 pct were prepared successfully applying a new powder metallurgy fabrication route in which magnesium was used as a space holder, resulting in either single austenite phase or a mixture of austenite and martensite phases dictated by the composition of the starting powders, but entirely free from secondary brittle intermetallics, oxides, nitrides, and carbonitrides. Since transformation temperatures are very sensitive to composition, deformation, and...
Cyclacenes having mono boron or nitrogen atom in the backbone - a theoretical study Türker, Burhan Lemi; Gumus, S (Elsevier BV, 2004-04-09) Semi-empirical molecular orbital treatment at the level of AMI unrestricted Hartree-Fock type calculations was performed on the Huckel type boron and nitrogen substituted cyclacenes. Substitution is done either in a peri position or a fusion points. Boron substitution is found to be destabilizing. whereas nitrogen substitution has stabilizing effect on parent cyclacenes.
Microstructural properties and local atomic structures of cobalt oxide nanoparticles synthesised by mechanical ball-milling process AKSOY, FUNDA; AKGÜL, GÜVENÇ; Kurban, Mustafa (Informa UK Limited, 2016-01-01) In this study, facile preparation of pure and nano-sized cobalt oxides particles was achieved using low-cost mechanical ball-milling synthesis route. Microstructural and morphological properties of synthesised products were characterised by X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. XRD results indicated that the fabricated samples composed of cubic pure phase CoO and Co3O4 nanocrystalline particles with an average crystallite size of 37.2 and 31.8nm, respectively. TEM im...

Citation Formats

B. Akgun, N. SEVİNÇ, H. E. ÇAMURLU, and Y. A. Topkaya, “Mechanochemical and combustion synthesis of CeB6,” INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, pp. 403–407, 2013, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/36366.