Hydaulic design criteria for steep sloped channels.

1966
Yücel, Öner
Show full item record
70
views
0
downloads
https://hdl.handle.net/11511/4774
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

HYGROTHERMAL FRACTURE ANALYSIS OF ORTHOTROPIC MATERIALS USING J(k)-INTEGRAL
Dağ, Serkan; Arslan, Onur; Arman, E. Erhan (2012-01-01)
A new computational method based on the J(k)-integral is put forward for the purpose of conducting fracture analysis of orthotropic materials subjected to hygrothermal stresses. By utilizing the constitutive relations of plane orthotropic hygrothermoelasticity, an alternative expression for the J(k)-integral is derived to replace the general limit definition. A numerical procedure is developed and integrated into a finite element analysis software to implement the proposed form of the J(k)-integral. Tempera...
Hygrothermal Fracture Analysis of Orthotropic Functionally Graded Materials Using J(k)-Integral-Based Methods
TOPAL, SERRA; Dağ, Serkan (Hindawi Limited, 2013-01-01)
This paper puts forward two different J(k)-integral-based methods, which can be used to perform mixed-mode fracture analysis of orthotropic functionally graded materials subjected to hygrothermal stresses. The first method requires the evaluation of both components of J(k)-integral, whereas the second method employs the first component.. 1 and the asymptotic crack tip displacement fields. Plane orthotropic hygrothermoelasticity is the basic theory behind the J(k)-integral formulation, which is carried out b...
Hygrothermal fracture analysis of fibrous composites with variable fiber spacing using JK-integral
Saeidi, Farid; Dağ, Serkan; Department of Mechanical Engineering (2013)
In this study, a Jk-integral based computational method will be developed to conduct fracture analysis of fibrous composite laminates that possess variable fiber spacing. This study will be carried out for the fibrous composites exposed to not only thermal but also hygroscopic boundary condition, which results hygrothermal load. Formulation of the Jk-integral will be carried out by using the constitutive relations of plane orthotropic hygrothermoelasticity. One of the most important challenges of this study...
Hydric dilation of Mount Nemrut sandstones and its control by surfactants
Akoglu, Kiraz Goze; Caner-Saltik, Emine N. (2015-05-01)
Hydric dilation measurements of Mount Nemrut sandstones, using a linear variation differential transformer (LVDT), were used to quantify in order to understand the effect of wetting-drying cycles on Mount Nemrut sandstones. Trials with some surfactants to inhibit swelling, resulting from the clay minerals in the structure, were investigated in order to propose some conservation treatments for the Mount Nemrut monument sandstones. The hydric dilation measurements of surfactant-treated sandstones showed some ...
Hydrid stress finite element model in elastodynamic analysis of beam structures.
Oral, Süha; Department of Mechanical Engineering (1981)
Citation Formats
Ö. Yücel, “Hydaulic design criteria for steep sloped channels.,” Middle East Technical University, 1966.
METU IIS - Integrated Information Service open@metu.edu.tr