Drillability studies of surface-set diamond drilling in Zonguldak region sandstones from Turkey

2005-04-01
AKUN, ME
Karpuz, Celal
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
55
views
0
downloads
Geotechnical Engineering and Engineering Geology
https://hdl.handle.net/11511/48238
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
Department of Mining Engineering, Article

Suggestions

Numerical modelling of out-of-seam dilution in longwall retreat mining
SAEEDI, G.; SHAHRIAR, K.; REZAI, B.; Karpuz, Celal (Elsevier BV, 2010-06-01)
Longwall mining is a common mining method in Iran that is often affected by out-of-seam dilution (OSD). The field investigations performed in Tabas coal mine show that OSD often occurs due to roof falls in front of the face area before support setting and also removing some floor material. The increase in unsupported roof span above the shearer may cause difficulty in controlling the roof and consequently increases dilution of the run of mine (ROM) coal. The paper presents the results of a study on some dom...
Influence of rock properties and environmental conditions on thin spray-on liner adhesive bond
Öztürk, Hasan (Elsevier BV, 2011-10-01)
A new method for automated estimation of joint roughness coefficient for 2D surface profiles using power spectral density
Unlusoy, Deniz; Süzen, Mehmet Lütfi (Elsevier BV, 2020-01-01)
In this study, a new method for the objective and accurate estimation of the joint roughness coefficient (JRC) of surface profiles, which are extracted from terrestrial laser scanner point clouds, is proposed. The requirements of objectivity, accuracy, reliability, and suitability for automatic analysis have been the basic criteria in assessing the performance of the procedure for JRC estimation. The procedure to estimate the JRC value of a sample profile is based on a similarity measure, between the third-...
Rock variability and establishing confining pressure levels for triaxial tests on rocks
SARI, M; Karpuz, Celal (Elsevier BV, 2006-02-01)
A probabilistic model for the assessment of uncertainties in the shear strength of rock discontinuities
DUZGUN, HSB; Yücemen, Mehmet Semih; Karpuz, Celal (Elsevier BV, 2002-09-01)
Discontinuity shear strength plays a critical role in many problems encountered in rock engineering, especially in the design of rock slopes. Since its precise estimation is generally not possible, it is crucial that the errors and uncertainties associated with its estimate be quantified and reflected in the design procedure. In this study, the uncertainties underlying discontinuity shear strength are thoroughly examined and an uncertainty analysis model is developed for the estimation of in situ discontinu...
Citation Formats
M. AKUN and C. Karpuz, “Drillability studies of surface-set diamond drilling in Zonguldak region sandstones from Turkey,” INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, pp. 473–479, 2005, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/48238.
METU IIS - Integrated Information Service open@metu.edu.tr