Nikel nanokümelerinin ileri teknoloji hidrojenasyon katalizörü olarak teorik ve deneysel olarak incelenmesi

Download
2006
Sayar, Aslı
Önal, Işık
Türkmenoğlu, Evren

Suggestions

Synthesis and characterization of nickel based bulk amkorphous alloys
Arslan, Hülya; Mekhrabov, Amdulla O.; Department of Metallurgical and Materials Engineering (2004)
The aim of this study is to synthesize and characterize new bulk amorphous alloys in the Ni- based systems. Theoretical studies on the basis of semi-empirical rules and the electronic theory of alloys in pseudopotential approximation has been provided in order to predict the impurity elements that will lead to an increase in the glass forming ability of Ni-based alloy systems. Glass forming ability of ten different compositions of alloys of Ni-Nb, Ni-Fe, Ni-B, Ni-Hf and Ni-Cr was simulated by using FORTRAN ...
Electrodeposition and characterization of nickel/titanium carbide nanocomposites
Acet, Nurcan; Eroğlu Pala, Damla; Department of Chemical Engineering (2017)
Due to their high hardness, anti-corrosion and anti-wear properties, Nickel/ceramic particle composites have gained significant attention as environmentally-friendly alternatives to chromium and cadmium based coatings typically used in the aerospace industry. Electrodeposition of these Ni/ceramic particle composites has the advantage of lower operating cost and operating temperature than the conventional production methods. Incorporation of ceramic nanoparticles into the Ni matrix has a significant effect o...
Solvent extraction of scandium from pregnant leach solution of nickel laterites
Ferizoğlu, Ece; Gürbüz, Rıza; Topkaya, Yavuz Ali; Department of Metallurgical and Materials Engineering (2017)
The aim of this thesis study is the extraction and recovery of scandium from lateritic nickel-cobalt ores by using the solvent extraction method. In this study, different organic and scrubbing reagents were investigated in order to find the most suitable organic extractant for the extraction of scandium with low impurity co-extraction and scrubbing reagent to remove the extracted impurities from the loaded organic phase. In the first part, different organic reagents that are DEHPA, Cyanex 272, Cyanex 923, I...
Synthesis and characterization of nickel zinc oxide nanoparticles and their investigation as water oxidation catalyst
Ağcalı, Rahime Yağmur; Nalbant Esentürk, Emren; Department of Chemistry (2020-10)
The depletion of fossil fuels has steered attention to discover new energy sources. Fossil fuels are not desirable to use because of their hazardous effects on earth and being non-renewable, yet they have been used as primary energy sources all over the world. Due to their limited amount, the focus of research has become maintaining renewable, green, and clean energy. In this sense, among others hydrogen has a great potential for being a primary source. The possible supplied energy from hydrogen is gr...
Electrocodeposition of molybdenum disulfide particles in nickel matrix
Saraloğlu Güler, Ebru; Karakaya, İshak; Konca, Erkan; Department of Metallurgical and Materials Engineering (2013)
The influence of the electroplating parameters and their interactions on hydrogen evolution reaction (HER) and the internal stress were studied during the electrodeposition of Ni and Ni-MoS2 composite coatings by fractional factorial design (FFD) and analyzed by Minitab software package. The parameters and their ranges were; MoS2 particle concentration (0 and 30 g/L), temperature (30 and 50 ºC), pH (2 and 4) and three surfactants, sodiumlignosulfonate (SLS), ammoniumlignosulfonate (ALS) and depramin-C (DC) ...
Citation Formats
A. Sayar, I. Önal, and E. Türkmenoğlu, “Nikel nanokümelerinin ileri teknoloji hidrojenasyon katalizörü olarak teorik ve deneysel olarak incelenmesi,” 2006. Accessed: 00, 2020. [Online]. Available: https://app.trdizin.gov.tr/publication/project/detail/TmpZMk5UVT0.