Strength and water-cement relations for concretes using various types of normal Portland cements produced in Istanbul region.

1970
Çuhadar, Arif
Show full item record
43
views
0
downloads
https://hdl.handle.net/11511/5113
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Strength and fracture properties of roller compacted concrete (RCC) prepared by an in-situ compaction procedure
ŞENGÜN, EMİN; Aleessa Alam, Burhan; Shabani, R.; Yaman, İsmail Özgür (Elsevier BV, 2020-01-01)
© 2020 Elsevier LtdThe use of roller compacted concrete (RCC) technology in pavement applications has been steadily increasing owing to its economical as well as practical advantages. Past literature studies on RCC mixtures, focused mainly on the effects of RCC mixtures on their strength and durability properties, and there is a lack in the fracture properties. In this experimental study, a total of seven different RCC mixtures were designed with four different binder ratios ranging from 200 kg/m3 to 600 kg...
Strength and stress corrosion resistance optimization of thick plate AL-7075 alloy
Tur, Kazım; Ankara, Osman Alpay; Department of Metallurgical and Materials Engineering (1996)
Strength and stiffness of floor trusses fabricated from cold-formed steel lipped channels
Dizdar, Cagan; Baran, Eray; Topkaya, Cem (Elsevier BV, 2019-02-15)
This paper reports findings of an experimental study on floor trusses fabricated from cold-formed steel lipped channel sections. In design, the members of these trusses are generally considered as pin-ended and their capacities are assessed under pure compressive and tensile loads by making use of commonly accepted design specifications. Seventeen full-scale floor trusses were experimentally investigated through four point bending tests. Thickness of lipped channels, number of connection fasteners, and type...
Strength properties of concretes prepared from two diffrenet types of cements under diffrent curing conditions
Türkmenoğlu, M Nejat; Erdoğan, Turhan Y.; Department of Civil Engineering (1990)
Strength and stiffness requirements for intermediate ring stiffeners on discretely supported cylindrical shells
Zeybek, Ozer; Topkaya, Cem; Rotter, J. Michael (2015-11-01)
Silos in the form of a cylindrical metal shell are often supported on a ring beam which rests on discrete column supports. This support condition produces a circumferential non-uniformity in the axial membrane stresses in the silo shell. One way of reducing the non-uniformity of these stresses is to use a very stiff ring beam which partially or fully redistributes the stresses from the local support into uniform stresses in the shell. A better alternative is to use a combination of a flexible ring beam and ...
Citation Formats
A. Çuhadar, “Strength and water-cement relations for concretes using various types of normal Portland cements produced in Istanbul region.,” Middle East Technical University, 1970.
METU IIS - Integrated Information Service open@metu.edu.tr