Finite element analysis of saltwater intrusion in coastal aquifers

Download
001255.pdf
1987
Sadeg, Salah Ali
Show full item record
53
views
0
downloads
https://hdl.handle.net/11511/5797
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Finite element analysis of strength characteristics of various resin based restorative materials in Class V cavities
Yaman, SD; Şahin, Melin; Aydin, C (Wiley, 2003-06-01)
This study investigated the strength characteristics of various composites (Tetric Ceram, Tetric Flow, Prisma AP.H, Synergy Duo Shade, Synergy Compact, and Z 100) and compomers (Compoglass, Compoglass F, Dyract AP, F 2000) that were applied in a Class V cavity of a maxillary central incisor. The study was conducted by using a 3-dimensional finite element approach and in the study ansys package program was used. The tooth model had 294 elements and 420 nodes. The teeth considered were assumed to be subjected...
Finite element analyses of differential shrinkage - induced craking in centrifugally cast concrete poles
Tanfener, Tuğrul; Göktepe, Serdar; Yaman, İsmail Özgür; Department of Civil Engineering (2012)
Poles are used as an important constituent of transmission, distribution and communication structures; highway and street lighting systems and other various structural applications. Concrete is the main production material of the pole industry. Concrete is preferred to steel and wood due not only to environmental and economic reasons but also because of its high durability to environmental effects and relatively less frequent maintenance requirements. Centrifugal casting is the most preferred way of manufac...
Finite element analysis of tapered preforms in cold upsetting
Elmaskaya, Nazım; Darendeliler, Haluk; Gökler, Mustafa İ.; Department of Mechanical Engineering (1997)
Finite element analysis of the effects of tapered preforms on the final product in cold upsetting
Dogan, O.; Gökler, Mustafa İlhan; Darendeliler, Haluk (null; 2002-12-01)
The effects of the tapered preform shapes on the final product in cold upset forging are presented. As such, different preform geometries with different upset ratios are considered for the same final part geometry. In addition, the elastic-plastic finite element method is used to examine die filling and determine the flash volume in the final stage for different preform geometries. It is observed that, well-filled final products are obtained when the preform shapes and die cavities are designed according to...
Finite Element Analysis of Effects of Tapered Preforms on Final Product in Cold Upsetting
Doğan, Özgür; Gökler, Mustafa İlhan; DARENDELİLER, HALUK (2002-09-06)
Citation Formats
S. A. Sadeg, “Finite element analysis of saltwater intrusion in coastal aquifers,” Middle East Technical University, 1987.
METU IIS - Integrated Information Service open@metu.edu.tr