A plate bending element with enforced continuity

Download

007051.pdf

Date

1989

Author

Katari, B. Emadeddin

Metadata

Show full item record

Item Usage Stats

40
views

0
downloads

URI

https://hdl.handle.net/11511/7115

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

A Shear flexible facet shell element for large deflection and instability analysis Oral, Süha (Elsevier BV, 1991-12-01) A facet shell element based on an anisoparametric plate bending element and a quadratic plane-stress element with vertex rotations is formulated for geometrically nonlinear analysis of shells. The updated Lagrangian formulation which proves to be effective for three-node elements is employed. The restriction of small rotation between the increments is removed by using Hsiao's finite rotation method in which the rigid body motion is eliminated from the total displacement. The displacement control is used to ...
A Mach-uniform preconditioner for incompressible and subsonic flows Bas, Onur; Tuncer, İsmail Hakkı; Kaynak, Unver (2014-01-20) In this study, a novel Mach-uniform preconditioning method is developed for the solution of Euler equations at low subsonic and incompressible flow conditions. In contrast to the methods developed earlier in which the conservation of mass equation is preconditioned, in the present method, the conservation of energy equation is preconditioned, which enforces the divergence free constraint on the velocity field even at the limiting case of incompressible, zero Mach number flows. Despite most preconditioners, ...
A compact pattern reconfigurable antenna employing shorted quarterwave patch antennas Çelik, Feza Turgay; Alatan, Lale; Aydın Çivi, Hatice Özlem (2022-10-01)
A Cartesian Based Mesh Generator with Body Fitted Boundary Layers Özkan, Merve; Baran, Özgür Uğraş; Aksel, Mehmet Haluk (null; 2018-07-03)
A SHEAR FLEXIBLE FINITE-ELEMENT FOR NONUNIFORM, LAMINATED COMPOSITE BEAMS Oral, Süha (Elsevier BV, 1991-01-01) A shear flexible finite element is formulated for linearly tapered, symmetrically laminated composite beams. The element has three nodes and 18 degrees of freedom. The three-node configuration is obtained from a five-node parent element by constraining the shear angle variation to be linear. The bending in two planes, twisting and stretching are considered. The performance of the element is tested with isotropic and composite materials, constant and variable cross-sections, and straight and curved geome...

Citation Formats

B. E. Katari, “A plate bending element with enforced continuity,” Middle East Technical University, 1989.