Monitoring the Overburden Excavation Stripping in Open Cast Mines by Using GIS and RS

Date

2002-10-10

Author

Demirel, Nuray
Akyürek, Sevda Zuhal

Metadata

Show full item record

Item Usage Stats

95
views

0
downloads

URI

https://hdl.handle.net/11511/71183

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Monitoring the microstructural changes during tempering of quenched SAE 5140 steel by magnetic barkhausen noise Davut, Kemal; Gür, Cemil Hakan (Springer Science and Business Media LLC, 2007-12-01) The aim of this work is to characterize the microstructures of quenched and tempered steels non-destructively by a diverse set of parameters of the Magnetic Barkhausen Noise method (MBN fingerprint, frequency spectra, pulse height distribution, root-mean-square, and total number of pulses). Identical specimens from a SAE 5140 steel bar were prepared. All specimens were austenitized at 860 degrees C for 30 minutes and water-quenched identically. The quenched specimens were then tempered at various temperatur...
Monitoring urban traffic from floating car data (fcd): using speed or a los-based state measure Altıntaşı, Oruç; Tüydeş Yaman, Hediye; Tuncay, Kağan (Springer, Cham, 2019-01-01) Floating Car Data (FCD) has an important traffic data source due to its lower cost and higher coverage despite its reliability problems. FCD obtained from GPS equipped vehicles can provide speed data for many segments in real-time, as provided by Be-Mobile for urban regions in Turkey. Though only providing speed per consecutive road segments, FCD is a great data source to visualize urban traffic state, in the absence of any other traffic data source, which is the focus of this study. After evaluation of var...
Monitoring variation of surface residual stresses in shot peened steel components by the magnetic Barkhausen noise method SAVAŞ, SERDAR; Gür, Cemil Hakan (2010-12-01) Shot peening is a cold working process by which residual compressive stresses are induced in the surface and near-surface region to increase the fatigue strength and the resistance to stress corrosion cracking This study covers non-destructive evaluation of surface residual stresses in the shot peened steel components by the magnetic Barkhausen noise method For this purpose various sets of steel specimens were prepared by a controlled shot peening process with different intensities impact angles and coverag...
Monitoring Bülbülderesi and Bakacak landslides with photogrammetric techniques Muratoğlu, Bükay; Süzen, Mehmet Lütfi; Department of Geological Engineering (2009) Every year, thousands of people all over the world are loosing their lives in natural disasters. As a second most widespread hazard, landslides are still a disaster problem for Turkey. The long-term monitoring studies of instability phenomena have a paramount importance for Turkey to reduce its both direct and indirect effects. The objective of this thesis is to monitor the activity of the Bülbülderesi and Bakacak landslides in Asarsuyu Catchment for 42 years period by the digital aerial photogrammetric tec...
Monitoring Changes in Surface Mining Area by Using SPOT Satellite Images Demirel, Nuray; Akyürek, Sevda Zuhal (2003-07-24)

Citation Formats

N. Demirel and S. Z. Akyürek, “Monitoring the Overburden Excavation Stripping in Open Cast Mines by Using GIS and RS,” 2002, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/71183.