Modeling and Simulation of Bulk Glass Forming Ability of Fe-Mo based Multicomponent Alloys

Date

2014-06-01

Author

Mehrabov, Amdulla
Akdeniz, Mahmut Vedat

Metadata

Show full item record

Item Usage Stats

93
views

0
downloads

URI

https://hdl.handle.net/11511/71249

Conference Name

The 10-th International Conference on Bulk Metallic Glasses (BMG X) (2014)

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Modeling and simulation of chemical agent dispersion Özdamar, Hüdai Hakkı; Üçer, Ahmet Ş.; Oğuztüzün, Halit; Department of Mechanical Engineering (2003)
Modeling and simulation of photobioreactors for biological hydrogen production Androga, Dominic Deo; Eroğlu, İnci; Uyar, Başar; Department of Biotechnology (2014) In applications of photofermentative hydrogen production, maintaining optimal temperature, feed composition, pH range and light intensity is the most critical objective for growth and proper functioning of the photosynthetic bacteria. Response Surface Methodology was applied to optimize temperature and light intensity for indoor hydrogen production using Rhodobacter capsulatus. Surface and contour plots of the regressions models developed revealed a maximum hydrogen production rate of 0.566 mol H2/m3/h at 2...
Değişken hızlı rüzgar türbinlerinin modellenmesi ve arıza sonrası sisteme katkı yeteneklerinin incelenmesi Koç, Erkan; Güven, Ali Nezih (IEEE; 2010-12-05) Son yıllarda rüzgâr enerjisi sistemlerindeki teknolojik gelişmeler ve sağlanan devlet destekleri, rüzgâr enerjisinin elektrik üretim profilindeki payını artırmaktadır. Bu artan pay sebebiyle iletim/dağıtım sistem operatörleri, şebeke yönetmeliklerini tekrar gözden geçirmek zorunda kalmışlardır. Ayrıca, sistemin kararlı iletimini sağlamak için, oluşan arızalarda rüzgâr türbinlerinin şebekeye bağlı kalması bir zorunluluk haline gelmiştir. Bu çalışma, rüzgâr türbinlerinin elektrik şebekesine entegrasyonu çalış...
Modeling and investigation of fault ride through capability of variable speed wind turbines Koç, Erkan; Güven, Ali Nezih; Department of Electrical and Electronics Engineering (2010) Technological improvements on wind energy systems with governmental supports have increased the penetration level of wind power into the grid in recent years. The high level of penetration forces the wind turbines stay connected to the grid during the disturbances in order to enhance system stability. Moreover, power system operators must revise their grid codes in parallel with these developments. This work is devoted to the modeling of variable speed wind turbines and the investigation of fault ride troug...
Modeling and design of reactor for hydrogen production using non-stoichiometric oxides Yılmaz, Arda; Kıncal, Serkan; Department of Chemical Engineering (2017) Nowadays countries investigate to improve alternative energy technologies such as solar power, biomass, wind energy, hydrogen etc. Hydrogen gas is very useful energy carrier and fuel cells produce electricity through hydrogen gas. Hydrogen production technologies are also investigated by many researches due to its high cost production. Thermochemical production way is one of the hydrogen production methods. Solar energy is also clean, renewable and alternative energy source. It is used for heating reaction ...

Citation Formats

A. Mehrabov and M. V. Akdeniz, “Modeling and Simulation of Bulk Glass Forming Ability of Fe-Mo based Multicomponent Alloys,” Shanghai, Çin, 2014, p. 226, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/71249.