Analysis of pressure wave formation in the exhaust manifold of a multi-cylinder four-stroke locally manufactured Diesel Engine and its effect on the performance.

1966
Abdi, Omar R
Show full item record
35
views
0
downloads
https://hdl.handle.net/11511/7332
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Analysis of the exhaust systems of internal combustion engines and development of a 40Bhp. locally manufactured Diesel Engine from this point of view.
Paykoç, Ediz; Department of Mechanical Engineering (1965)
Analysis of the stability of four slips in Ankara clay , using dhear box tests.
Haksoz, Inci; Department of Civil Engineering (1978)
Analysis of stress distribution in a maxillary central incisor subjected to various post and core applications
Yaman, SD; Alacam, T; Yaman, Yavuz (1998-02-01)
In this study, stress distribution in a maxillary central incisor that was subjected to endodontic treatment and various post and core applications was determined by using a three-dimensional finite-element method. Cast gold post and gold core and different combinations of prefabricated stainless-steel post, or a prefabricated titanium post with amalgam or composite cores were considered. In all cases, the tooth was assumed to have a porcelain crown. The primary purpose of the study was to evaluate the stre...
Analysis of the Raman frequencies of a lattice mode in NH4Cl close to the tricritical and second order phase transitions
Yurtseven, Hasan Hamit (Elsevier BV, 2006-4)
We analyze here our observed Raman frequencies of the nu(5) (174 cm(-1)) mode in NH4Cl close to its tricritical (P = 1.6 kbar) and the second order (P = 2.8 kbar) phase transitions. The critical behavior of the frequency shifts 1/nu (partial derivative nu/partial derivative T)(P) for this optical mode is described by a power-law with the critical exponent a. Our values of a = 0.01 (T < T-C) and a = 0.11 (T > T-C) for P = 1.6 kbar in NH4Cl are close to the values of 0.066 (=1/16) below T-C and 0.125 (=1/8) a...
Analysis of Hot Forming of a Sheet Metal Component Made of Advanced High Strength Steel
Demirkaya, Sinem; Darendeliler, Haluk; Gökler, Mustafa İlhan; Ayhaner, Murat (2013-07-10)
To provide reduction in weight while maintaining crashworthiness and to decrease the fuel consumption of vehicles, thinner components made of Advanced High Strength Steels (AHSS) are being increasingly used in automotive industry. However, AHSS cannot be formed easily at the room temperature (i.e. cold forming). The alternative process involves heating, hot forming and subsequent quenching. A-pillar upper reinforcement of a vehicle is currently being produced by cold forming of DP600 steel sheet with a thic...
Citation Formats
O. R. Abdi, “Analysis of pressure wave formation in the exhaust manifold of a multi-cylinder four-stroke locally manufactured Diesel Engine and its effect on the performance.,” Middle East Technical University, 1966.
METU IIS - Integrated Information Service open@metu.edu.tr