Surface Micromachining Implementation of S-Band 4-bit Phase Shifter

Date

2012-07-02

Author

Tokgöz, K.k.
Demir, Şimşek
Akın, Tayfun

Metadata

Show full item record

Item Usage Stats

40
views

0
downloads

URI

https://hdl.handle.net/11511/73921

Collections

Unverified, Article

Suggestions

OpenMETU
Core

Surface micromachined capacitive accelerometers using mems technology Yazıcıoğlu, Refet Fırat; Akın, Tayfun; Department of Electrical and Electronics Engineering (2003) Micromachined accelerometers have found large attention in recent years due to their low-cost and small size. There are extensive studies with different approaches to implement accelerometers with increased performance for a number of military and industrial applications, such as guidance control of missiles, active suspension control in automobiles, and various consumer electronics devices. This thesis reports the development of various capacitive micromachined accelerometers and various integrated CMOS re...
Surface Wave Suppression Properties of Perforated Artificial Impedance Surfaces Durgun, Ahmet Cemal; Birtcher, Craig R. (2013-01-01) Surface wave suppression properties of Perforated Artificial Impedance Surfaces (PAIS) are investigated. It is shown that, by a proper choice of perforation geometry, surface wave propagation can be suppressed without the need of vias. This significantly decreases fabrication costs. It is also possible to overlap the surface wave suppression and reflection phase bands of the PAIS. Due to the rotational asymmetry of the structure, surface wave suppression is achieved in only one direction.
Surface texturing study with aluminum induced texturing method on soda-lime glass substrates for thin film solar cells Ünal, Mustafa; Turan, Raşit; Ünalan, Hüsnü Emrah; Department of Micro and Nanotechnology (2017) It is essential to employ an effective light trapping scheme to decrease the cost of produced solar electricity further in thin film solar cell technologies. There are several methods that can be used for light trapping and aluminum induced texturing (AIT) is one of them. The aim of this thesis study is to obtain highly effective light trapping interface via texturing of glass surface by AIT process. The resultant texture is affected by several parameters such as Al thickness, annealing time and temperature...
Surface modification of unsized PAN- based carbon fiber by using high frequency single and dual RF discharge system Erözbek Güngör, Ümmügül; Bilikmen, Kadri Sinan; Akbar, Demiral; Department of Physics (2014) The aim of this thesis is to examine the effects of HF-RF nitrogen plasma treatment on unsized PAN-based carbon fiber surfaces. The fibers were treated under different plasma processing conditions; exposure times, RF powers and gas pressures in a homemade RF-PECVD reactor having two modes; single “40.68 MHz” and dual “40.68 /2.1 MHz”. Then, Raman and FT-IR spectroscopies were used to analyze the structure and functional groups of the fibers, respectively. Also, tensile strain of the samples was tested with ...
Surface cracking in an orthotropic medium subjected to frictional contact Sarikaya, Duygu; Dağ, Serkan (2016-07-01) This article presents an analytical method capable of resolving the coupled problem of surface cracking in an orthotropic elastic medium subjected to frictional contact by a rigid flat punch. Reciprocal influences between the surface crack and the flat punch are accounted for by establishing a fully coupled formulation. Governing partial differential equations involving the displacement components are derived in accordance with plane theory of orthotropic elasticity. General solutions corresponding to mode ...

Citation Formats

K. k. Tokgöz, Ş. Demir, and T. Akın, “Surface Micromachining Implementation of S-Band 4-bit Phase Shifter,” 2012, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/73921.