Effect of Tube Processing Methods on Microstructure and Mechanical Properties of Nanostructured Ferritic Alloys

Date

2016-02-18

Author

Aydoğan Güngör, Eda
Maloy, Stuart

Metadata

Show full item record

Item Usage Stats

79
views

0
downloads

URI

https://hdl.handle.net/11511/74774

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Effect of tube processing methods on microstructure, mechanical properties and irradiation response of 14YWT nanostructured ferritic alloys Aydoğan Güngör, Eda; Anderoglu, O.; Sun, C.; Gigax, J. G.; Shao, L.; Garner, F. A.; Anderson, I. E.; Lewandowski, J. J. (2017-08-01) In this research, innovative thermal spray deposition (Process I) and conventional hot extrusion processing (Process II) methods have been used to produce thin walled tubing (similar to 0.5 mm wall thickness) out of 14YWT, a nanostructured ferritic alloy. The effects of processing methods on the microstructure, mechanical properties and irradiation response have been investigated by using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and, micro- and nano-hardness techniques. It ...
Effect of tube processing methods on the texture and grain boundary characteristics of 14YWT nanostructured ferritic alloys Aydoğan Güngör, Eda; Anderoglu, O.; Maloy, S. A.; Vogel, S. C.; Odette, G. R.; Lewandowski, J. J.; Hoelzer, D. T.; Anderson, I. E.; Rieken, J. R. (2016-04-01) Texture and microstructure of tubes and plates fabricated from a nanostructured ferritic alloy (14YWT), produced either by spray forming followed by hydrostatic extrusion (Process I) or hot extrusion and cross-rolling a plate followed by hydrostatic tube extrusion (Process II) have been characterized in terms of their effects on texture and grain boundary character. Hydrostatic extrusion results in a combination of plane strain and shear deformations which generate low intensity alpha- and gamma-fiber compo...
Effect of electroless etching parameters on the growth and reflection properties of silicon nanowires Ozdemir, Baris; Kulakci, Mustafa; Turan, Raşit; Ünalan, Hüsnü Emrah (IOP Publishing, 2011-04-15) Vertically aligned silicon nanowire (Si NW) arrays have been fabricated over large areas using an electroless etching (EE) method, which involves etching of silicon wafers in a silver nitrate and hydrofluoric acid based solution. A detailed parametric study determining the relationship between nanowire morphology and time, temperature, solution concentration and starting wafer characteristics (doping type, resistivity, crystallographic orientation) is presented. The as-fabricated Si NW arrays were analyzed ...
Effect of heat treatment on microstructural and mechanical properties of molybdenum based PM ferrous alloys Davoudnezhad, Ramona; Ögel, Bilgehan; Durlu, Nuri; Department of Metallurgical and Materials Engineering (2016) In this study, the effect of different heat treatment processes on microstructural and mechanical properties of Distaloy-DH and Astaloy Mo (Fe-2Cu-1.5Mo) powders are investigated. Powder samples are sintered at 1120°C for 45 minutes in a sintering furnace under reducing atmosphere of: 10% H2 + 90% N2. After sintering, secondary heat treatments are performed on samples. Microstructural characterization of samples is done with optical and electron microscopy. Selective etching is utilized for determining the ...
Effect of composite preparation techniques on electrical and mechanical properties and morphology of nylon 6 based conductive polymer composites Koysuren, Ozcan; Yesil, Sertan; Bayram, Göknur (Wiley, 2006-11-05) Nylon 6/carbon black conductive composites were prepared using two different methods, masterbatch dilution and melt mixing. Their effect on the size and distribution of carbon black agglomerates in the matrix was studied in terms of electrical and mechanical properties and morphology. The electrical resistivity of composites prepared by both methods decreased with increasing filler composition. The electrical resistivity of the diluted masterbatch composites and the melt mixed composites was reduced from th...

Citation Formats

E. Aydoğan Güngör and S. Maloy, “Effect of Tube Processing Methods on Microstructure and Mechanical Properties of Nanostructured Ferritic Alloys,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/74774.