Mechanical and Biological Properties of Tooth Colored Zirconia Ceramics Developed for Dental Applications



Mechanical and optical properties of SiO2 thin films deposited on glass
Simurka, Lukas; Ctvrtlik, Radim; Tomastik, Jan; Bektaş, Gence; Svoboda, Jan; Bange, Klaus (2018-09-01)
The optical and mechanical properties of amorphous SiO2 films deposited on soda-lime silicate float glass by reactive RF magnetron sputtering at room temperature were investigated in dependence of the process pressure. The densities of the films are strongly influenced by the process pressure and vary between 2.38 and 1.91 g cm(-3) as the pressure changes from 0.27 to 1.33 Pa. The refractive indices of the films shift between 1.52 and 1.37, while the residual compressive stresses in the deposited films vary...
Mechanical and thermal properties of poly(acrylic acid) coated perlite filled polypropylene composites
Geçin, Sinem; Tinçer, Teoman; Department of Polymer Science and Technology (1996)
Mechanical and biological properties of Al2O3 and TiO2 co-doped zirconia ceramics
Agac, Ozlem; Gozutok, Melike; TÜRKOĞLU ŞAŞMAZEL, HİLAL; Öztürk, Abdullah; PARK, JONGEE (2017-09-01)
Various amounts (ranging from 0 to 2 wt%) of TiO2 and Al2O3 were mono and co-doped to tetragonal zirconia ceramic containing 3 mol% yttria (3Y-TZP) by mechanical ball milling. Powders were compacted by uniaxial pressing at a pressure of 23 MPa. The compacts were pressureless sintered at 1450 degrees C for 2 h. Density, hardness, fracture toughness, and cell attachment of the co-doped 3Y-TZP ceramics were measured with respect to dopant addition to determine the effects of the kind and amount of dopants on t...
Mechanical and thermal properties of polylactide/talc microcomposites: before and after accelerated weathering
Kaynak, Cevdet (2016-06-01)
The purpose of the first part of this study was to investigate effects of micron-sized talc content on the properties of polylactide (PLA). PLA/talc microcomposites were compounded by melt-mixing method via twin-screw extruder, while specimens for testing and analyses were shaped by injection molding. It was observed that, because of the effective stiffening, strengthening, toughening mechanisms of talc, and also their nucleation agent effects for higher crystallinity, many mechanical and thermal properties...
Mechanical properties of perlite filled SBR vulcanizates: effects of mixing time and silane treatment on properties
Ülkem, Nilgün; Tinçer, Teoman; Department of Chemistry (1991)
Citation Formats
A. Öztürk, “Mechanical and Biological Properties of Tooth Colored Zirconia Ceramics Developed for Dental Applications,” 2019, Accessed: 00, 2021. [Online]. Available: