The First Single Event Effect Test Campaign in Turkey at The METU Defocusing Beamline Project Pre-liminary Set Up



The First Fabricated Dual-Band Uncooled Infrared Microbolometer Detector with a Tunable Micro-Mirror Structure
Keskin, Selcuk; Akın, Tayfun (2012-04-27)
This paper presents the first fabricated dual-band uncooled resistive infrared thermal microbolometer implemented with a resistive microbolometer and a tunable micro-mirror structure. Tunable reflective micro-mirrors are suspended underneath the suspended resistive microbolometers having a 35 mu m pixel pitch, and they are switched between two positions by the application of an electrostatic force for obtaining different responses in two wavelength infrared atmospheric windows, namely the 3-5 and 8-14 mu m,...
A virtual panopticon in Turkey during the COVID-19 pandemic: The case of location-based mobile application 'Hayat Eve Sığar'
Tükenmez, Başak; Karakaş, Bilge (2022-03-01)
Based on Jeremy Bentham's panopticon design (1785) as the architectural manifestation of surveillance, Foucault theorizes how modern societies are built upon the relationship between power and knowledge operated by surveillance, self-regulation, and participation. With the development of information and communication technologies, these power and surveillance mechanisms expand beyond the spatial boundaries. During the Covid-19 pandemic, the measures against the disease such as tracing, quarantine, an...
A BIM-based collaboration system in design phase of metro projects in turkish AEC industry
Kaş, Serhat; Akçamete Güngör, Aslı; Department of Civil Engineering (2019)
BIM is a 3D model that contains both geometric and non-geometric information. This comprehensive data enables BIM to be used for many different purposes during various phases of the projects. However, the quality and completeness of the data generated during the design phase are essential for supporting all other uses of BIM. Therefore, it could be considered that the more effectively the design authoring process can be managed, the more favorable it will be for all BIM processes. Nowadays, BIM processes ar...
A site analysis and improvement concept project in a small anatolian town: İskilip
İlter, Tolga; Kural, İlhan; Department of Architecture (1998)
A fabrication process based on structural layer formation using Au-Au thermocompression bonding for RF MEMS capacitive switches and their performance
Cetintepe, Cagri; Topalli, Ebru Sagiroglu; Demir, Şimşek; Aydın Çivi, Hatice Özlem; Akın, Tayfun (2014-10-01)
This paper presents a radio frequency micro-electro-mechanical-systems (RF MEMS) fabrication process based on a stacked structural layer and Au-Au thermocompression bonding, and reports on the performance of a sample RF MEMS switch design implemented with this process. The structural layer consists of 0.1 mu m SiO2/0.2 mu m SixNy/1 mu m Cr-Au layers with a tensile stress less than 50 MPa deposited on a silicon handle wafer. The stacked layer is bonded to a base wafer where the transmission lines and the iso...
Citation Formats
M. B. Demirköz, “The First Single Event Effect Test Campaign in Turkey at The METU Defocusing Beamline Project Pre-liminary Set Up,” 2018, Accessed: 00, 2021. [Online]. Available: