Amfibik Askeri Zırhlı Araçlarının Seçili Parçalarının Deniz Suyu Ortamında Katodik Koruma Modellemesi

Date

2016-10-06

Author

Uğuz, R Onur
Aksu, Rauf
Meço, Halim
Erdoğan, Metehan
Karakaya, İshak

Metadata

Show full item record

Item Usage Stats

94
views

0
downloads

FNSS özgün tasarımlarından olan Samur, nehir üzerinde köprü kurulmasını sağlayan bir Seyyar Yüzücü Hücum Köprüsü aracıdır. Ancak ilerleyen dönemde beliren tuzlu suda da kullanım gereksinimi, aracın korozyon koruma seviyesinin arttırılması gerektiğini ortaya çıkartmıştır. Alternatif yöntemler değerlendirilmiş ancak araçların tasarım ve üretim süreci tamamlandığı için en etkin çözümün katodik koruma olabileceği belirlenmiştir. Aracın su ile temas eden yüzeylerinde farklı malzemenin kullanılıyor olması katodik koruma uygulaması için dikkat edilen bir konu olmuştur. Bu sebeple kullanılan farklı malzemeler için GAMRY polarizasyon yazılımı kullanılarak polarizasyon testleri uygulanmış ve malzemelerin elektrokimyasal davranışları incelenmiştir. Elde edilen sonuçlar ve aracın üç boyutlu modeli COMSOL yazılımına aktarılmış ve modelleme çalışmaları başlatılmıştır. Çalışmalar devam etmekte olup ilerleyen süreçte modelleme çalışması geliştirilerek optimum koruma değerlerine ulaşılması hedeflenmektedir.

Subject Keywords

Cathodic Protection, Amphibious Military Vehicles

URI

https://hdl.handle.net/11511/75838
http://www.korozyondernegi.org.tr/upload/mce/bildiriler/korsem/korsem_14_2016bayburt.pdf

Conference Name

KORSEM, 2016

Collections

Department of Metallurgical and Materials Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Corrosion Behaviors of Different Aluminum Allyos and Cathodic Protection Application to the Amphibious Military Vehicles Uğuz, Refik Onur; Meço, Halim; Erdoğan, Metehan; Karakaya, İshak (null; 2016-11-01) The Amphibious Assault Bridge vehicle was designed and produced by FNSS Defense Systems Inc. Purpose of this vehicle is bridging over the rivers and letting pass the other vehicles easily. However, some of the vehicles are being used in seawater instead of fresh water. This leads to corrosion of the vehicles at higher rate than expected. It was not possible to adopt modifications of design of the vehicle, improving coating quality, changing the environment and etc. because the vehicles were already produced...
External configuration design and aerodynamic optimization of modular guided munitions Gün, Mert; Sezer Uzol, Nilay; Department of Aerospace Engineering (2019) Guided munitions, also known as gliding missiles, are not stand alone systems; rather, they are converted from a dummy body with the help of guidance kits. Guided munitions are used in great number during military operations, unlike air-to-air or cruise missiles. Guided munitions can be classified in two main sub-categories. First group provides guidance and stability with use of strakes. These type of missiles used for relatively short ranges. Second group has wings instead of strakes and effective in larg...
Parametric investigation of hull shaped fuselage for amphibious UAV Sazak, Emre; Kurtuluş, Dilek Funda; Department of Aerospace Engineering (2017) Performance of amphibious unmanned aerial vehicles (UAV’s) that take off from and land on water, like seaplanes, greatly depend on hydrodynamic effects as well as aerodynamic effects, therefore their geometries need to be optimized for both. This study mainly investigates the effect of geometric parameters of a generic, hull-shaped fuselage that are constrained by hydrodynamic drivers, such as the step height needed to reduce hydrodynamic drag, sternpost angle and deadrise angle needed for safe landing; on ...
Effect of wing heating on flow structure of low swept delta wing Şencan, Gizem; Yavuz, Mehmet Metin; Güvenç Yazıcıoğlu, Almıla; Department of Mechanical Engineering (2016) Micro Air Vehicles (MAVs), Unmanned Air Vehicles (UAVs) and Unmanned Combat Air Vehicles (UCAVs), which can be represented by simplified planforms including low swept delta wings, have many advantages in defense industry and aeronautical field. Thus, the aerodynamics of nonslender delta wings including development and application of different flow control techniques have been of considerable interest in recent years. In this study, it is aimed to investigate the effect of heating on the flow structure over...
Navier-Stokes computations of helicopter rotor flow fields Yüksel, Ali Oğuz; Özyörük, Yusuf; Department of Aerospace Engineering (2017) Helicopters are widely used for military and civilian purposes because of their unique capability of maneuvering including vertical take-off and landing. A helicopter rotor provides this capability of motion with rotating wings. Aerodynamic forces on rotor blades generate the thrust and torque. Hence, it is significant to predict pressure distributions on rotor blades in hover, climbing, descending, and forward flight, for assessing the helicopter performance. Not only this but acoustic radiation from helic...

Citation Formats

R. O. Uğuz, R. Aksu, H. Meço, M. Erdoğan, and İ. Karakaya, “Amfibik Askeri Zırhlı Araçlarının Seçili Parçalarının Deniz Suyu Ortamında Katodik Koruma Modellemesi,” presented at the KORSEM, 2016, 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/75838.