Non-destructive Monitoring of Salt Weathering in Dolostone

Date

2017-05-15

Author

Tavukçuoğlu, Ayşe
Erol, Fatıma
Çetin, Özlem
Karahan Dağ, Fulya

Metadata

Show full item record

Item Usage Stats

108
views

0
downloads

URI

https://hdl.handle.net/11511/75936

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Non-Destructive Evaluation of Surface Residual Stresses in Shot-Peened Steels Çalışkan, Salim; Gür, Cemil Hakan (null; 2018-12-26)
Non-destructive evaluation of residual stresses in the multi-pass steel weldments Erian, Gökhan; Gür, Cemil Hakan; Batıgün, Caner; Department of Metallurgical and Materials Engineering (2012) The purpose of this thesis is non-destructive determination of residual stress state in the multi-pass welded steel plates by Magnetic Barkhausen Noise (MBN) technique. To control the effectiveness of the developed procedure, continuous MBN measurements on the heat affected zone and parent metal of the welded plates were performed. In the experimental part, various steel plates were welded with different number of weld passes. Various series of samples were prepared for residual stress and for angular defle...
Non-Destructive Determination of Surface Residual Stresses in the Carburized SAE 8620 Steel Components Kaleli, Tuğçe; Gür, Cemil Hakan (2018-12-26) Management of the residual stress state has critical importance for fatigue life of the carburized steel components. The conventional methods of residual stress measurement are either destructive or have limited ability for in-situ measurement or take considerable time. Hence, there is a need for rapid, practical and reliable non-destructive method for measurement of residual stress. The aim of this study is to investigate the efficiency of the magnetic Barkhausen noise (MBN) method for evaluation of the su...
Non-linear analysis of concrete tunnel lining, in Cohesionless soils. Torun, Bulent; Department of Civil Engineering (1979)
Non-destructive testing of columns under axial compression using tranverse vibration technique, and ultrasonic approaches Kaynak, Mehmet; Türer, Ahmet; Department of Civil Engineering (2004) The level of axial compressive load on an existing column is one of the most important parameters to be known. This thesis aims to investigate current state of the art of NDT techniques, their application, and investigate alternative ways of using current technology to estimate the axial compressive load on columns. For this purpose, transverse vibration technique, ultrasonic pulse velocity method, and waveform and frequency content evaluation of ultrasound are investigated and implemented. Analytical and e...

Citation Formats

A. Tavukçuoğlu, F. Erol, Ö. Çetin, and F. Karahan Dağ, “Non-destructive Monitoring of Salt Weathering in Dolostone,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/75936.