Design and construction of a metal spraying unit and application of sprayed electodes in 'electric discharge machining'.

1977
Gülersoy, Gürbüz
Show full item record
50
views
0
downloads
https://hdl.handle.net/11511/7667
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design, construction and application of a metal wire spraying unit to coat plastic housings for RFI and EMI shielding.
Erdoğan, Bektaş; Department of Mechanical Engineering (1985)
Design and test of an absorbing liquid solar collector with an investigation on its use for warm water purposes.
Eren, Oya; Department of Mechanical Engineering (1983)
design and construction of a rotary tipe, bending moment fatigue tester for tests at elevated temperatures and investigation of fatigue properties on plain and nothed specimens.
Borçbakan, Cevat; Department of Mechanical Engineering (1965)
Design and construction of a pure high voltage capacitance divider.
Taplamacıoğlu, M Cengiz; Department of Electrical Engineering (1986)
Design and construction of a cw mode nd:YAG laser prototype
Eryılmaz, Ertan; Esendemir, Akif; Department of Physics (2004)
In this thesis a theoretical background of Nd:YAG lasers has been presented and key parameters of a design have been stated. Both pulsed mode and CW mode designs have been made; a 500mJ xenon flash lamp has been investigated as the pulsed light source and a 500W tungsten halogen lamp has been used as the continuous light source for optical pumping. Closed cooling system has been constructed. De-ionized water has been used as coolant. The goal has been acomplished by constructing a CW mode prototype. The out...
Citation Formats
G. Gülersoy, “Design and construction of a metal spraying unit and application of sprayed electodes in ‘electric discharge machining’.,” Middle East Technical University, 1977.
METU IIS - Integrated Information Service open@metu.edu.tr