A-C resistance criterion for fatigue life prediction.

1978
Gereçci, V Kamil
Show full item record
42
views
0
downloads
https://hdl.handle.net/11511/7694
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A displacement method for the analysis of fluid-solid interaction problems.
Ekinci, Yavuz; Department of Civil Engineering (1986)
A method for optimum design of salient pole synchronous generators.
Saibatir, Behçet Melih; Department of Electrical Engineering (1982)
A Link delay computation method for the quality of service support in software defined networks
Balo, Efe; Güran Schmidt, Ece.; Department of Electrical and Electronics Engineering (2019)
Packet switched networks cannot provide tight delay bounds that are required by certain types of applications despite facilitating high throughput. Therefore, delay measurementtechniquesforpacket-switchednetworkshavealwaysgrabbedtheattention of the community to both utilize advantages of packet-switched networks and provide a realistic end to end delay prediction of packets. Software Defined Networking (SDN) isa new paradigmofpacket-switchednetworkingwhichgathersmanagement functionality of network in a logic...
A Correlation Improvement Technique for Model Updating of Structures
Altunel, Fatih; Celik, Mehmet; Çalışkan, Mehmet (2016-10-01)
This study proposes a new correlation improvement technique for the optimum node removal location to get improved modal assurance criterion (MAC) matrix. The technique is applied to updating of the finite element model (FEM) of a structure. The developed routine is tried on a utility helicopter. It is proven that it is capable of showing better performance than the coordinate MAC (coMAC), commonly used in such analyses. Commercial software is utilized for the finite element analysis of the helicopter fusela...
A Scheduling method for sporadic traffics in industrial IoT
Özceylan, Baver; Baykal, Buyurman; Department of Electrical and Electronics Engineering (2017)
Internet of Things technology continues to develop as a commercial value and it has become one of the core elements of Industry 4.0 paradigm. Together with that, IEEE 802.15.4e standard provides Time-Slotted Channel Hopping (TSCH) operation mode especially for industrial applications that have strict QoS requirements. In spite of the fact that the standard defines frame structure in MAC layer, there has been no standardization in scheduling for TSCH frame yet. It brings serious challenge for engineering des...
Citation Formats
V. K. Gereçci, “A-C resistance criterion for fatigue life prediction.,” Middle East Technical University, 1978.
METU IIS - Integrated Information Service open@metu.edu.tr