Characterization of dental feldspathic porcelain and apatite wollastonite glass ceramic interface

Date

2015-11-27

Author

Pekkan, Gürel
Pekkan, Keriman
Park, Jongee
Öztürk, Abdullah

Metadata

Show full item record

Item Usage Stats

52
views

0
downloads

URI

https://hdl.handle.net/11511/79453

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Characterization of Amorphous and Partially Crystalline Cu Zr Al Sm Metallic Glass Sıkan, Fatih; Kalay, İlkay; Kalay, Yunus Eren (null; 2015-09-02)
Characterization of a marginal glass former alloy solidified in gas atomized powders Kalay, Yunus Eren; ANDERSON, I. E. (2008-08-25) Al90Sm10, a marginal glass former, was rapidly solidified using high pressure gas atomization (HPGA). Rapid solidification is a non-equilibrium process, with different degrees of departure from full equilibrium constituting a microstructural hierarchy that correlates with increasing solidification rate. In accordance with this the resultant HPGA powders show a variety of microstructures according to their particle diameters, corresponding to degree of undercooling, with an amorphous structure appearing at h...
CHARACTERIZATION OF ACTIVATED CARBON PRODUCED FROM ALMOND SHELL AND HAZELNUT SHELL BALCI, S; Doğu, Timur; YUCEL, H (Wiley, 1994-08-01) Ammonium chloride-impregnated and untreated almond shell and hazelnut shell samples were carbonized in a flow of nitrogen at relatively low temperatures. Pore structure characterization and sorption capacities of activated carbons prepared from shells of almond and hazelnut indicated that treatment with NH4Cl increased the total surface area and improved sorption characteristics. Chemical activation carried out at 350-degrees-C gave products with surface area values above 500 m2 g-1. On the other hand, the ...
Characterization of serpentine filled polypropylene Can, Semra; Tinçer, Teoman; Department of Polymer Science and Technology (2008) In this study, the aim is to prepare polypropylene (PP)/serpentine composites and study their mechanical, thermal and morphological properties. Another objective is to explore whether it is possible to have PP/serpentine nanocomposites with melt intercalation method by using the advantage of the layer silicate structure of serpentine. The most widely used fillers in PP are talc and mica which belong to the phyllosilicates group of silicate minerals. So far, there has been almost no study employing serpentin...
Characterization of molybdenum oxide and magnesium doped zinc oxide charge transport layers deposited by sputtering for heterojunction solar cells Bektaş, Gence; Yerci, Selçuk; Department of Micro and Nanotechnology (2017) Group IV semiconductors can easily be doped by group III and V elements to possess p and n type behavior, respectively, which enables homojunction solar cell designs. However, most of the compound semiconductors including CIGS, CdTe and perovskite can intrinsically be either n or p type. Therefore, heterojunction structures with well-aligned conduction bands between the absorber and electron transport layer (ETL) and well-aligned valence bands between the absorber and hole transport layer (HTL) are required...

Citation Formats

G. Pekkan, K. Pekkan, J. Park, and A. Öztürk, “Characterization of dental feldspathic porcelain and apatite wollastonite glass ceramic interface,” 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/79453.