Optimization of AuSn Eutectic Bonding Using Thermal Evaporation Process

Date

2015-03-15

Author

Demir, Eyup
Donmez, Inci
Torunbalci, Mustafa
Akin, Tayfun
Kalay, Yunus Eren

Metadata

Show full item record

Item Usage Stats

154
views

0
downloads

URI

https://hdl.handle.net/11511/79647

Conference Name

TMS 2015, 15 - 19 Mart 2015

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Optimization of open-tube furnace diffusion with Bbr3 liquid source for industrial p-type boron doping process Orhan, Efe; Kökbudak, Gamze; Semiz, Emel; Es, Fırat; Turan, Raşit (Middle East Technical University; 2018-07-06) In this study, optimization of boron emitter for n-type crystalline Si solar cells has been studied in detail. Industrial open-tube (atmospheric) furnace with BBr3 as liquid B source was utilized which is a preferred dopant for the diffusion process of n-type wafers in industry [1] [2]. During the processes, full boat (270 wafers) n-type square samples were used to investigate the uniformity from gas zone to door zone and inside the wafer. To achieve uniform boron emitters on large n-type substrates, parame...
Optimization of Graphene Synthesis by Electrochemical Exfoliation of Graphite Kurt, Vahit; Aydınol, Mehmet Kadri (2017-09-28)
Optimization of graphene synthesis by electrochemical exfoliation of graphite Kurt, Vahit; Aydınol, M. Kadri.; Department of Metallurgical and Materials Engineering (2019) Graphene is a one atom thick allotrope of carbon that is a honeycomb lattice of carbon atoms. Graphene has a lot of extraordinary properties and these properties cause increasing of interest on it. In addition to high specific surface area, high transparency, high strength, graphene is the material that has best electrical conductivity ever. These properties make graphene a suitable candidate for a lot of applications. Since its discovery, a lot of research has been done about how to produce graphene and ho...
Optimization of Graphene Synthesis by Electrochemical Exfoliation of Graphit Kurt, Vahit; Aydınol, Mehmet Kadri (2019-09-11)
Optimization of the mechanical properties of Ti-6Al-4V alloy fabricated by selective laser melting using thermohydrogen processes BILGIN, Guney Mert; Esen, Ziya; Akin, Seniz Kushan; Dericioğlu, Arcan Fehmi (2017-07-17) 2-step Thermo Hydrogen Process (THP) including hydrogenation and dehydrogenation steps was applied to Ti-6Al-4V alloy fabricated by selective laser melting (SLM) process to refine the microstructure and to increase the ductility of the alloy. It was observed that as-fabricated alloy's surface was composed of oxides of titanium and aluminum, which may alter the hydrogenation kinetics. The hydrogen treatment for 1 hat 650 degrees C, the maximum hydrogen solubility temperature of the alloy, transformed startin...

Citation Formats

E. Demir, I. Donmez, M. Torunbalci, T. Akin, and Y. E. Kalay, “Optimization of AuSn Eutectic Bonding Using Thermal Evaporation Process,” presented at the TMS 2015, 15 - 19 Mart 2015, 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/79647.