Yüksek basınçlı homojenizasyon mikro akışkanlaştırma işlemine maruz bırakılan Osmanlı çileği suyunun F ananassa fiziksel ve kimyasal özellikleri

Date

2015-11-12

Author

Karaçam, Çağrı Helin
Şahin, Serpil
Öztop, Mecit Halil

Metadata

Show full item record

Item Usage Stats

41
views

0
downloads

URI

https://hdl.handle.net/11511/80827

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Effect of high pressure homogenization (microfluidization) on the quality of Ottoman strawbery (F.ananassa) juice Karaçam, Çağrı Helin; Öztop, Halil Mecit; Şahin, Serpil; Department of Food Engineering (2015) High pressure homogenization (microfluidization) is a non-thermal process that is commonly used in food processing. Microfluidization provides convenience because it does not require any chemical. Also, the quality of juice is affected minimally. In this study, the effect of high-pressure homogenization (microfluidization) on the physical and chemical properties of Ottoman strawberry juice was evaluated. Two different pass numbers and two different pressures were used for the homogenization treatment. Effec...
Characterization of ultra-fine grained steel samples produced by high pressure torsion via magnetic barkhausen noise analysis Bayramoğlu, Sadık; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2009) High Pressure Torsion (HPT) is one of the most widely used severe plastic deformation methods which enable to obtain a crack free ultra-fine grained bulk material with improved mechanical properties like increased strength and toughness. In the process, a disc shaped sample is pressed between two anvils and deformed via surface friction forces by rotating one of the anvils. The aim of this study is to nondestructively characterize the variations in the deformation uniformity of the severely deformed steel d...
Effect of process parameters on mechanical properties of high pressure die cast magnesium AZ91 components Okcu, Işık Yılmaz; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2011) Before beginning the experimental work of this study, a magnesium high pressure die casting facility is set up to manufacture magnesium cast parts for defence industry. In this thesis two components are cold chamber high pressure die casted using magnesium alloy AZ91 as raw material, and one component was manufactured using both aluminium alloy A.413, and magnesium alloy AZ91. Mechanical properties of high pressure die casting parts depend on various parameters such as, thickness of the cast part, position ...
The Improvement of corrosion resistance of high porous powder metallurgy alloys by coating with polymeric materials Aivazov, Bilayet; Aliyev, Maksut; Mehrabov, Amdulla; Doruk, Mustafa (Korozyon Derneği, 1998-05-01)
Yüksek sıcaklıklarda çelik, pirinç, bakır ve aluminyum malzemelerinin plastik özelliklerinin bulunması Kaftanoğlu, Bilgin; Sıvacı, Kenan(1975)

Citation Formats

Ç. H. Karaçam, S. Şahin, and M. H. Öztop, “Yüksek basınçlı homojenizasyon mikro akışkanlaştırma işlemine maruz bırakılan Osmanlı çileği suyunun F ananassa fiziksel ve kimyasal özellikleri,” 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/80827.