Ayrık Logaritma Problemini Kullanan E İmza

2006-12-07

Suggestions

Combined centralized and decentralized fault diagnosis for discrete event systems
Karav, Ruhi; Schmidt, Şenan Ece; Schmidt, Klaus Werner; Department of Electrical and Electronics Engineering (2014)
Discrete Event Systems (DES) are used for modeling systems such as manufacturing systems, telecommunication systems and transportation systems. It is possible to incorporate the fault model in the DES model together with a fault diagnosis approach to evaluate the robustness and the reliability of the system at the design stage. There are centralized or decentralized fault diagnosis approaches in the literature. The centralized fault diagnosis achieves stronger results however it does not scale to reasonably...
Three dimensional numerical modelling of discontinuous rocks by using distinct element method
Koçal, Arman; Karpuz, Celal; Department of Mining Engineering (2008)
Shear strength characterization of discontinuities is an important concept for slope design in discontinuous rocks. This study presents the development of a methodology for implementing Barton-Bandis empirical shear strength failure criterion in three dimensional distinct element code, 3DEC, and verification of this methodology. Normal and shear deformation characteristics of discontinuities and their relations to the discontinuity surface characteristics have been reviewed in detail. First, a C++ dynamic l...
Development of beam scheduling algorithm for frequency diverse array /
Çetiner, Ramazan; Demir, Şimşek; Department of Electrical and Electronics Engineering (2015)
Electronic scanning is the most desirable feature of radar systems. With electronic scanning, it is possible to steer the main beam of an array antenna instantaneously into a desired direction where no mechanical mechanism is involved in the scanning process. Electronic scanning methods including phase scanning, time delay scanning, and frequency scanning have been used in various radar applications; however new and cheaper scanning methods are still being investigated. It is the purpose of this thesis to i...
Discrete bifurcation diagrams and persistence
Örnek, Türkmen; Pamuk, Semra; Department of Mathematics (2018)
Let fti : M → R be a discrete Morse function on a cell complex M for each t0 < t1 < ... < tn = 1. Let us denote slice as Mi = M ×{ti} ⊂ M × I and let Vi be the discrete vector field on each slice. After extending the discrete vector field on each slice to a discrete vector field on all of M ×I, a discrete bifurcation diagram is obtained by connecting critical cells of the slices. In”Birth and Death in Discrete MorseTheory”(King,Knudson,Mramor), a solution about finding the discrete bifurcation diagram has been ...
CMOS readout electronics for mis-matched and mode-matched MEMS gyroscopes
Yeşil, Ferhat; Akın, Tayfun; Department of Electrical and Electronics Engineering (2015)
This thesis presents the CMOS readout electronics for both mismatched and mode-matched MEMS gyroscopes. A systematic design of MEMS gyroscope's control loop parameters, which is insensitive to sensor parameters and environmental conditions, is necessary for robust and high performance operation. Extra to the systematic design for high performance operation, some special techniques should be used to further increase the performance of the sensor. In this thesis, as a performance increasing technique, mode-ma...
Citation Formats
M. Cenk and O. Yayla, “Ayrık Logaritma Problemini Kullanan E İmza,” 2006, Accessed: 00, 2021. [Online]. Available: http://www.ueimzas.gazi.edu.tr/pdf/poster/38.pdf.