Hollow fiber membranes with microstructured inner skin

Date

2013-07-26

Author

Çulfaz Emecen, Pınar Zeynep
Lammertınk, Rob Gh

Metadata

Show full item record

Item Usage Stats

29
views

0
downloads

URI

https://hdl.handle.net/11511/83268

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Hollow fiber ultrafiltration membranes with microstructured inner skin Çulfaz Emecen, Pınar Zeynep; Lammertink, R.G.H. (2011-03-01) Hollow fiber membranes with microstructured inner surfaces were fabricated from a PES/PVP blend using a spinneret with a microstructured needle. The effect of spinning parameters such as polymer dope flow rate, bore liquid flowrate, air gap and take-up speed on the microstructure and shape of the bore and its deformation was investigated. It was found that when a high bore liquid flowrate was used, the microstructure in the bore surface was destroyed. The bores were deformed to an oval shape when the fiber ...
Hollow core mesoporous shell carbon supported Pt electrocatalysts with high Pt loading for PEMFCs Guvenatam, Burcu; Ficicilar, Berker; BAYRAKÇEKEN YURTCAN, Ayşe; Eroğlu, İnci (Elsevier BV, 2012-01-01) The aim of this study is to synthesize mesoporous carbon supports and prepare their corresponding electrocatalysts with microwave irradiation method and also increasing the Pt loading over the carbon support by using some additional reducing agents. Pt loadings on hollow core mesoporous shell (HCMS) and commercial Vulcan XC72 carbon supports up to 34% and 44%, respectively, were achieved via polyol process with microwave irradiation method. When hydrazine or sodium borohydride was used in addition to ethyle...
Glass fiber reinforced sealants for solid oxide fuel cells Timurkutluk, Bora; Altan, Tolga; Celik, Selahattin; Timurkutluk, Cigdem; PALACI, Yüksel (Elsevier BV, 2019-07-05) Novel sealants for solid oxide fuel cells are developed by addition of glass fiber into glass ceramic as a reinforcement material. Various sealants including three different fiberglass types and four different structural designs are fabricated. The mechanical and sealing performances of the sealants are investigated via tensile and short stack leakage tests, respectively. The tensile tests reveal that the fracture strength of the sealants varies depending on the type and number of the glass fiber used. In g...
Thin-film transistors based on poly, (3,3 '''-dialkyl-quarterthiophene) and zinc oxide nanowires with improved ambient stability Vieira, Sara M. C.; Hsieh, Gen-Wen; Ünalan, Hüsnü Emrah; Dag, Sefa; Amaratunga, Gehan A. J.; Milne, William I. (AIP Publishing, 2011-03-07) The ambient stability of thin-film transistors (TFTs) based on zinc oxide (ZnO) nanowires embedded in poly (3,3'''-dialkyl-quarterthiophene) was monitored through time dependence of electrical characteristics over a period of 16 months. The hybrid-based TFT showed an initial hole mobility in the linear regime of 4.2 x 10(-4) cm(2)/V s. After 16 months storage in ambient conditions (exposed to air, moisture, and light) the mobility decreased to 2.3 x 10(-5) cm(2)/V s. Comparatively the organic-based TFT lost...
Thin Crystalline Silicon Solar Cells for Flexible Photovoltaics Hadibrata, Wisnu; Es, Fırat; Çiftpınar, Emine Hande; Turan, Raşit; Yerci, Selçuk (2016-05-06)

Citation Formats

P. Z. Çulfaz Emecen and R. G. Lammertınk, “Hollow fiber membranes with microstructured inner skin,” 2013, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/83268.