Karikatürlerdeki Matematik

2019-07-01
Toker, Habibe
Sevinç, Şerife
Bu çalışmada; matematik dersinin, matematik öğretmenlerinin, matematik eğitimi ve öğretiminin internette yer alan karikatürlerde nasıl yansıtıldığının ortaya konulması amaçlanmaktadır. Bu amaç doğrultusunda ön araştırmanın ardından belirlenmiş olan bazı internet sitelerinden belirli bir zaman aralığında 75 adet matematik karikatürü “matematik karikatürleri” ve “mathematics cartoon” olarak iki ayrı dilde yapılmıştır. Toplanan verileri incelemede nitel araştırma yöntemlerinden biri olan doküman analizi metodu kullanılmıştır. Elde edilen verilerin organizasyonu, kodlanması ve analizi gibi süreçlerin tamamında Nitel Veri Analiz Programı olan MAXQDA (VERBI Software, 2018) yazılımından yararlanılmış ve veriler içerik analizi yöntemiyle analiz edilmiştir. Öğretmenlerin fiziksel görünüşlerine göre yapılan kodlamalarda en çok kullanılan öğretmen figürünün gözlüklü kadın, yaşlı kadın ve şişman kadın olduğu oluşturulan kod bulutu ile tespit edilmiştir. Bu kodların karikatürlerde resmedilen temel işlemlerde dahi yetersizlik kodu ile yakın ilişkili olduğu, kod-birlikte-oluşma modelleri ile ortaya çıkarılmıştır. Yine, öğretmenlerin duruşları ile ilgili elde edilen direk göz teması kurma ve parmağı ile işaret etme durumlarının, öğrencilerin çabalayan/endişeli yüz ifadeleri ile birlikte ortaya çıktığı görülmüştür.
Uluslararası Türki Bilgisayar ve Matematik Eğitimi Sempozyumu (26 - 28 Eylül 2019)

Suggestions

Investigation of turbulence models used in automotive industry
Taştan, Umur; Çetinkaya, Tahsin Ali; Department of Mechanical Engineering (2011)
In this study; reliability and performance of turbulence models used in CFD softwares to determine the aerodynamics of passenger cars, are tested and compared. In the analyses, drag forces acting on the car, pressure and velocity distributions and wake flow patterns are determined by using several turbulence models with a commercial software Fluent. Calculated results compared to the experimental results given in the literature. It is observed that, turbulence models give relatively reliable results for det...
Gas production from hydrate resevoirs
Alp, Doruk; Parlaktuma, Mahmut; Department of Petroleum and Natural Gas Engineering (2005)
In this study; gas production by depressurization method from a hydrate reservoir containing free gas zone below the hydrate zone is numerically modeled through 3 dimensional, 3 phase, non-isothermal reservoir simulation. The endothermic nature of hydrate decomposition requires modeling to be non-isothermal; hence energy balance equations must be employed in the simulation process. TOUGH-Fx, the successor of the well known multipurpose reservoir simulator TOUGH2 (Pruess [24]) and its very first module TOUGH...
Substituted quinoxaline and benzimidazole containing monomers as long wavelength photosensitizers for diaryliodonium salt initiators in photopolymerization
Çorakçı, Bengisu; Toppare, Levent Kamil; Çırpan, Ali; Department of Chemistry (2013)
In this study; ferrocenyl and naphthalenyl substituted quinoxaline derivatives; 5,8- bis (2,3- dihydrothieno [3,4-b] [1,4] dioxin-5-yl)-2- (naphthalen-2-yl)- 3- ferrocenyl- 4a,8a-dihydroquinoxaline; 5,8- bis (2,3-dihydrothieno [3,4-b] [1,4]dioxin-5-yl) -2- (phenyl) -3-ferrocenylquinoxaline; 5,8-bis (2,3-dihydrothieno [3,4-b] [1,4]dioxin-5-yl) -2,3- di(naphthalen-2-yl)quinoxaline and trihexylthiophene and thiophene coupled benzimidazole derivatives; 4-(tert-butyl)-4,7-bis(4-hexylthiophen-2-yl)spiro[benzo[d]i...
The Coastal circulation model of Büyük Menderes river mouth and adjacent coastal areas
Gözlet, Mehmet Sedat; Özyurt Tarakcıoğlu, Gülizar; Baykal, Cüneyt; Department of Civil Engineering (2019)
In this study; coastal circulation of Buyuk Menders river mouth and the adjacent coastal areas is modeled to determine the current characteristics of the region under river-sea interaction. For this purpose, Finite Volume Coastal Ocean Model (FVCOM) numerical model is setup and run under wind, tide, and river forcing conditions. Current, salinity, temperature data from field measurements are used to validate the performance of the model setup with default parametrization. Significance of each forcing on the...
CO2 emissions of Turkish manufacturing industry: A decomposition analysis
Akbostancı Özkazanç, Elif; Tunç, Gül İpek (2011-06-01)
In this study. CO2 emissions of Turkish manufacturing industry are calculated by using the fuel consumption data at ISIC revision 2, four digit level. Study covers 57 industries, for the 1995-2001 period. Log Mean Divisia Index (LMDI) method is used to decompose the changes in the CO2 emissions of manufacturing industry into five components: changes in activity, activity structure, sectoral energy intensity, sectoral energy mix and emission factors. Mainly, it is found that changes in total industrial activ...
Citation Formats
H. Toker and Ş. Sevinç, “Karikatürlerdeki Matematik,” İzmir, Türkiye, 2019, p. 724, Accessed: 00, 2021. [Online]. Available: http://www.bilmat.org/dosyalar/files/ozetler.pdf.