The effect of impeller configuration and impeller speed on the yield of three phase hydrogenation reactions

Date

2014-06-11

Author

Ayrancı Tansık, İnci
Shen, Jing
Semagina, Natalia

Metadata

Show full item record

Item Usage Stats

37
views

0
downloads

URI

https://hdl.handle.net/11511/84942

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

The effect of film thickness, Se/S ratio and annealing temperature on the nonlinear absorption behaviors in amorphous GaSexS1-x (0 <= x <= 1) thin films Isik, Pinar; KARATAY, AHMET; YAĞLIOĞLU, HALİME GÜL; ELMALI, Ayhan; Kurum, Ulas; ATEŞ, AYTÜNÇ; Hasanlı, Nızamı (2013-02-01) The amorphous GaSexS1-x (0 <= x <= 1) semiconductor thin films were prepared with different thickness by using vacuum evaporation technique. The nonlinear absorption properties of the films were studied by Z-scan and ultrafast pump-probe techniques. Linear absorption measurements showed blue shift in energy as the film thickness increased. This can be attributed quantum confinement effect due to particle size decreasing with increasing film thickness. Pure GaSe and GaSexS1-x films exhibit saturable absorpti...
The Effect of austempering process parameters on the mechanical properties of ductile cast iron Keleş, Evin; Atala, Haluk; Department of Metallurgical and Materials Engineering (2001)
The effect of SN content and isothermal transformation temperature on the mechanical properties of austempered ductile cast iron Özcan, Alper; Atala, Haluk; Department of Metallurgical and Materials Engineering (2003) In this study the effects of Sn content and isothermal transformation temperature on the ultimate tensile strength (UTS), elongation and hardness of austempered ductile cast iron (ADI) was investigated. To determine the possible effect of Sn on these properties the Sn content of standard GGG30, GGG40 and GGG50 materials were taken as reference, whose chemical compositions vary from 0,016 to 0,050% in terms of Sn. However the Sn content was increased to a maximum of 0,26% for investigating the effect of Sn o...
The effect of magnisium to sulfur ratio on the graphite morphology of graphite cast iron produced at differrent section thicknesses ELMABROUK, Omar; ERFAN, Osama M.; Kalkanlı, Ali (2011-09-18) This paper is concerned with the investigation of the effect of magnesium to sulfur ratio on the graphite morphology and estimation of the ranges of this ratio use to produce graphite cast iron at different section sections. The main factors affecting shape of graphite cast iron are the metallurgical structures and the section thicknesses. Cast iron of different shapes of graphite particles directly affect its thermo-mechanical properties. The nodular shape of these graphite particles such as in ductile cas...
The effect of lime pile parameters on the improvement of the swelling potential of expansive clay Çokça, Erdal; Özkan, İlyas (2022-09-01) Expansive clay found especially in the semi-arid or arid regions of the world is a problematic soil that causes much damage to the lightweight structures built by civil engineers. The Lime pile technique is one of the improvement techniques applied for the stabilization of the expansive clay subgrade layer of highway constructions. The achievement of this technique depends on lime diffusion into expansive clay which is affected by some parameters related to the lime pile such as the height of the lime...

Citation Formats

İ. Ayrancı Tansık, J. Shen, and N. Semagina, “The effect of impeller configuration and impeller speed on the yield of three phase hydrogenation reactions,” 2014, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/84942.