The Effect of austempering process parameters on the mechanical properties of ductile cast iron

Download
116397.pdf
2001
Keleş, Evin
Show full item record
183
views
0
downloads
https://hdl.handle.net/11511/12234
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

The Effect of austempering heat treatment on the microstructure and mechanical properties of ductile irons
Kinalır, K. Gökhan; Atala, Haluk; Department of Metallurgical and Materials Engineering (1997)
The effect of SN content and isothermal transformation temperature on the mechanical properties of austempered ductile cast iron
Özcan, Alper; Atala, Haluk; Department of Metallurgical and Materials Engineering (2003)
In this study the effects of Sn content and isothermal transformation temperature on the ultimate tensile strength (UTS), elongation and hardness of austempered ductile cast iron (ADI) was investigated. To determine the possible effect of Sn on these properties the Sn content of standard GGG30, GGG40 and GGG50 materials were taken as reference, whose chemical compositions vary from 0,016 to 0,050% in terms of Sn. However the Sn content was increased to a maximum of 0,26% for investigating the effect of Sn o...
THE EFFECT OF REUSED POWDER CHARACTERISTICS ON THE PROPERTIES OF ADDITIVELY MANUFACTURED 17-4 PH STAINLESS STEEL
Kahraman, Ece; Ögel, Bilgehan; Yasa, Evren; Department of Metallurgical and Materials Engineering (2022-4-25)
Powder bed additive manufacturing methods use the powder form of the material of the part to be produced as raw material. The quality of the production is highly dependent on the properties of the powder used in the first place. Consistently using new unused powder for each new additive manufacturing is costly and removes the advantage of additive manufacturing, i.e. low amount of waste material. In powder bed additive manufacturing methods, powders are laid layer by layer and melted by laser or electron be...
The effect of copper on the microstructure and aging characteristics of an 0.8%C bainitic steel
Yıldırım, Çağatay; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2022-12-02)
Copper causes hot shortness in steel. However, the 1:2 nickel-to-copper ratio avoids hot shortness phenomena. Also, it is known that an aging treatment applied to ferritic steels causes age hardening via the precipitation of Cu in the form of BCC copper-rich clusters. The latter phenomenon was studied extensively in low and medium-carbon steels. In this study, the copper precipitation in bainitic high-carbon steel and its effect on microstructure and properties are investigated. To achieve this, 0.8% C stee...
The effect of anneling temperature and time on mechanical properties of crosslinked polyethlene film
Banat, Raid M. I.; Tınçer, Teoman; Department of Chemistry (1997)
Citation Formats
E. Keleş, “The Effect of austempering process parameters on the mechanical properties of ductile cast iron,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr